User's Manual

NewsCaster VT2 Operation
M17-0002-01A Rev 0.0 62 User Manual
(EPROMs, FPGA, etc.), including
the current ASI rate fed to the
system, and the maximum rate
supported by the system.
• Up-Converter - for monitoring the
Up-Converter voltages and verifying
is software version.
• RF Head - for monitoring the
aspects and data of the RF Head
section.
• Front Panel - for monitoring the
aspects and data of the Front Panel
section.
ALARMS SCREEN
The Alarms Screen provides the user with a
list of current unit alarms that have been
triggered by a problem with either the signal
reception or with the receiver itself. Using
this tool, the unit can be troubleshot to
correct all problems. (Previous alarm states
are not listed under this screen. The alarm
state is listed here only as long as the alarm
is on. Should an alarm occur during
operation, the “Alarm LED” will also
illuminate.)
Alarms are listed by priority and not by
occurrence.
See Section 5-5 for Troubleshooting.