User's Manual

CamPac2 Operation
M13-0003-00A
26
Changing Settings:
To change, view, input, select or update
settings, values, rates, levels or options
throughout most of the system, do the
following
1. Select the desired menu or option by using
the Rotary Dial and ENT button to reach
the desired screen.
Note: See the CamPac2 Menu Tree
diagram at the end of this document
for placement and location of all
options.
2. Press ▼ (Ent) to view that menu’s options.
4. Continue to press ▼ (Ent), and drill down
the menus until the value fields that need to
be changed are displayed.
5. Click on the Value field until it becomes
Active, (turns green).
6. Press the rotary dial, clockwise or counter-
clockwise to select value fields up or down
respectively –or- use the rotary dial to
scroll up or down an options list to your
choice with an *asterisk.
The settings have been saved to the system.
Note: If you are not choosing from an
options list, then you will be setting
the value from circulating the
rotary wheel. These value fields
need to be pressed until they turn
green and become “active”, before
they can be manipulated and data
can be changed. When you reach
the correct value, press [Enter] to
save.
5.4 TOP MENU
The Top Menu is reached by pressing ENT at
the DEFAULT screen, once the unit is booted.
Figure 11: Top Menu
5.6 MAIN MENU
Figure 12: Main Menu
5.7 RF SETUP
(MAIN>RF SETUP)
Figure 13: RF Setup Menu
RF Setup
Modulation
Video Setup
Audio Setup
Edit Presets
System
Alarms
Frequency
Bandwidth
TX Power
MAIN MENU
PRESETS
PWR ON
RF OFF
LOCK