User's Manual

CamPac2 Operation
M13-0003-00A
30
5.10 AUDIO SETUP
(MAIN>AUDIO)
Figure 25: AUDIO Setup
5.10.1 Inputs
(MAIN>AUDIO>INPUTS)
Figure 26: Audio Inputs List
5.10.2 Audio Level dB
(MAIN>AUDIO>Audio Level dB)
Figure 27: Audio Level dB
5.11 PRESETS
5.11.1 Storing Presets
(MAIN>EDIT PRESETS>PRESET 1-4)
1. Make your preferred settings.
2. From the MAIN Menu, select Edit Presets.
Figure 28: Presets Options
3. Select the Preset to be saved, press ▼(Ent).
Figure 29: Preset Menu Options
4. Select Store, then press ▼ (Ent) to save
your new preset to the system.
The Store screen is displayed, and reads:
[Preset Stored].
5.11.2 Naming (Labeling) Presets
(MAIN>EDIT PRESETS>PRESET 1-4)
1. Using the rotary dial, scroll to the Name
option and press ▼(Ent).
The Preset name (originally 1 through 4)
appears on the screen.
2. Press ▼ (Ent) to activate the Preset name
field (it will turn green).
The cursor appears on the first alpha-
numeric character of the current name.
3. Press the rotary dial, clock –or-counter-
clockwise to change the first character in
the new label.
4. When you have reached the desired value
(number or letter), press ▼ (Ent) –or-
► on the rotary dial to go to the next
character in your label. Use the ◄
directional arrow on the rotary dial to
backup if needed.
5. Repeat the procedure for the rest of the
characters on this preset until the title has
been created.
6. Press ▼ (Ent) and ▲(Esc) to register your
label in the system.
The label is displayed on the screen.
Inputs
Audio Level dB
Mic/Lines
Mic/AES
AES/AES
Embedded SDI
Tone
Beep
Tone & Beep
CH1: +0
CH2: +0
CH3: +0
CH4: + 0
PRESETS 1
PRESETS 2
PRESETS 3
PRESETS 4
Recall
Store
Name