User's Manual

Software Install
3. Verify the following files are located in the installer folder:
a. WiGigInstaller_x**.msi
b. WiGigInstaller_DbgStack_x**.msi
The suffix x** means x86 for a 32-bit platform and x64 for a 64-bit platform.
Note: During the first installation the device driver is installed and the following “Windows
Security” pop-up may appear:
4. Choose Install this driver software anyway and continue the installer.
Select Operation Mode
There are two operation modes:
• Test mode: no broadcasting takes place. Primarily used for characterization by the OEM
Tool.
• Operational mode: the Maple Peak card is fully active in either one of the types in the next
step.
Note: A hostless dock is always in operational mode, no matter what was selected in the
installation.
5. Choose Test Mode.
Select Setup Type
The Maple Peak card can be used for either notebook or dock:
• Notebook: the notebook transmits data to the dock.
Dock: the dock receives and displays data from the notebook.
July 2014 Intel
®
Maple Peak
Document Number: 537178-2.1 User Guide
Intel Confidential 13