User's Manual

WiGig Application User Manual
2. Click Disconnect in the CU.
The dock’s LED turns off and the dock’s monitor and devices disconnect.
In auto-connect profiles undesired auto-connection will be blocked after a managed undocking until
one of the following conditions apply:
• User exits the dock’s range
• Client resumes from a low-power mode (S3/S4/S5  S0) (not currently supported).
4.5.2 Spontaneous undocking
When the user exits the range of the dock without making a managed disconnection, the link drops
after attempts to recover. The dock’s LED powers off after the link drops.
4.6 Forget this dock
Choose the dock and click Forget this dock to delete a dock profile. This deletes the profile of the dock
and requires a manual connection and pairing for the next connection. (This option is only available
when the relevant dock is not connected).
4.7 Docking
4.7.1 Automatic docking
A connection to the dock begins automatically when the dock is configured to auto-connect and the
user enters the dock’s range. The NB’s lid can be open or closed.
July 2014 Intel
®
Maple Peak
Document Number: 537178-2.1 User Guide
Intel Confidential 21