User's Manual

WiGig Application User Manual
• The dock LED turns green, docking is completed within a few seconds, and the dock monitor
shows the display.
4.7.2 Manual docking
No connection is initiated when the dock is configured to manually connect and the user enters the
dock’s range. The dock’s LED stays off.
Clicking Connect in the CU next to the dock’s name begins the docking process. Once docking is
complete the dock’s LED turns green and the docking monitor shows the display.
4.8 Dock FW upgrade
The dock FW can be upgraded using the CU application. The dock’s FW upgrade does not occur
automatically; it requires the user’s initiation to allow for user control of the process.
Upgrade the FW from the CU Dock Settings screen.
Click the Upgrade button and choose the Dock Image.
To choose the same version installed on the NB side go to C:/ProgramFiles/Intel/WiGig/Drivers and
choose Dock_Image.pack.
A progress indication for the process displays in the CU. If the upgrade fails, the previous version
remains and the user is notified.
When completed, a reset is performed and the device is up with the new version. Close the window.
Intel
®
Maple Peak July 2014
User Guide Document Number: 537178-2.1
22 Intel Confidential