Intel® Wireless Gigabit v2.0 User Guide October 2015 Revision 3.3 Intel Confidential Document Number: 537178-3.
Notice: This document contains information on products in the design phase of development. The information here is subject to change without notice. Do not finalize a design with this information. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
Contents 1 2 3 4 Introduction ................................................................................................................. 8 1.1 Scope ............................................................................................................... 8 1.2 References......................................................................................................... 8 1.3 Wireless docking ................................................................................................
.4 4.5 4.6 5 Diagnostic information ........................................................................................ 40 Managing docks ................................................................................................. 40 Notification messages ......................................................................................... 42 4.6.1 Not found ......................................................................................... 42 4.6.2 Try Connecting your device again ..
Figures Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure 1-1 2-1 2-2 2-3 3-1 3-2 3-3 3-4 3-5 3-6 3-7 3-8 3-9 3-10 3-11 3-12 3-13 3-14 3-15 3-16 3-17 3-18 3-19 3-20 3-21 3-22 3-23 3-24 3-25 3-26 3-27 3-28 3-29 3
Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure 4-15 4-16 4-17 4-18 4-19 4-20 4-21 5-1 5-2 5-3 Device not found .............................................................................................42 Try connecting your device again ......................................................................43 Couldn’t connect .............................................................................................44 Weak connection toast .......................................
Revision History Revision Description Date 1.0 Initial release. May 16, 2013 1.1 Alpha update November 25, 2013 2.0 Beta update April 9, 2014 2.1 Beta 1.5 update June 30, 2014 2.2 Beta 2 update September 11, 2014 2.3 Chapter 2.2 flashing dock instructions October 23, 2014 3.0 PV version updates November 26, 2014 3.1 Added 4.1.1. Maple Peak DisplayPort Bandwidth and other limitations January 8, 2015 3.2 SW version 2.0 March 30, 2015 3.
Introduction 1 Introduction This chapter provides an overview of the Intel Wireless Gigabit (WiGig) solution, which comprises the Intel® Tri-Band Wireless-AC17265 (Client), Intel® Tri-Band Wireless-AC18265 (Client), the Intel® Wireless Gigabit Sink W13100 (Dock), and the Intel® Wireless Gigabit Antenna-M 10041R (Antenna). 1.1 Scope This document familiarizes customers with the Intel WiGig software (SW) solution components and provides installation and configuration details. 1.
Introduction Figure 1-1 Use models 1.3.3 Wireless peripheral The wireless peripheral feature allows a device to interact with high-speed USB peripherals over WiGig. For example, a directly attached storage device equipped with Maple Peak SNK would allow a high-speed USB 3.0 connection with Intel WiGig equipped tablet or notebook. When connecting, many of the wireless docking capabilities would be applicable (excluding of course the display capabilities), allowing USB 3.
Software Install 2 Software Install 2.1 NB-side installation 1. Go to G Layout\Win7Plus\ and run Setup.exe. Setup.exe installs the relevant installer for either a 32-bit platform or a 64-bit platform. Figure 2-1 End User License Agreement screen Check I have reviewed and agree to the EULA and click Install. This will install the operational WiGig software for the NB. 2. When the application is successfully installed, check the Do you want to launch Intel® Wireless Gigabit Dock Manager? option.
Software Install Figure 2-2 3. Success screen During the first installation, the device driver is installed. If the Windows Security message shown in Figure 2-3 appears, choose Install this driver software anyway to continue the installation. Figure 2-3 Note: Windows security message To avoid this window, run the certificate file (iCert.spc) from the Certificates layout. Run setup.exe –q from a command line to run the installer in silent mode. § October 2015 Document Number: 537178-3.
WiGig Application User Manual for Win 7/8/8.1 3 WiGig Application User Manual for Win 7/8/8.1 3.1 User manual The Intel® Wireless Dock Manager is a dedicated application that runs on the client and allows the user to find, connect to, and configure docks. LEDs on the dock, and an OSD (On Screen Display) on the monitor connected to the dock, provide further feedback about the dock status, and assist the user in performing actions.
WiGig Application User Manual for Win 7/8/8.1 Figure 3-2 Welcome OSD screen 2. This screen remains until the connection is made. After a few minutes of inactivity, the monitor turns off to conserve power. Press the dock activity button to wake up the monitor and continue with the connection. 3. Enable WiGig on your client. WiGig comes disabled out-of-the-box to conserve battery life until the first time WiGig is needed.
WiGig Application User Manual for Win 7/8/8.1 Figure 3-4 5. Choose the dock you wish to connect to by clicking it. Note: 6. Since this is the first time you are connecting to this dock, you will need to pair with it. Pairing creates a set of authentication keys that uniquely identify your client and dock pair, and allow them to communicate in a secured, encrypted manner over-the-air. Press the connection button on your dock to confirm it, as indicated in Figure 3-5. Figure 3-5 7.
WiGig Application User Manual for Win 7/8/8.1 Figure 3-6 8. OSD screen Press the activity button on the dock to complete the pairing process. The Connected screen appears shortly after, as shown in Figure 3-7. Figure 3-7 Note: Dock Connected screen A successful connection is also indicated by the dock LED (if available), and the external monitor and USB devices being connected and enumerated on your client (you will hear the Window’s gling-gling hot-plug audio cues).
WiGig Application User Manual for Win 7/8/8.1 Figure 3-8 Automatically Connect to this Dock For docks you connect to regularly, select Yes. For public docks or ones you use rarely, select No. 3.1.4 Automatic connections If a dock is set to connect automatically, WiGig will attempt to automatically connect to this dock once in range. To this end, WiGig keeps scanning in the background, while consuming very little power. To connect, simply place your client (assumed to be in S0) near the dock.
WiGig Application User Manual for Win 7/8/8.1 You can disable auto-connect by changing the toggle on the main Wireless Dock Manager screen while connected, as shown in Figure 3-9. Figure 3-9 Disabling the auto-connect setting You can only change a dock between automatic and manual connection when you are actively connected to the dock. Once auto-connect is disabled, the client will no longer connect automatically and you will have to manually select the dock from the client, as described in Section 3.1.5.
WiGig Application User Manual for Win 7/8/8.1 Another method to connect to a dock is via the tray icon. If there is only a single paired dock in range (that is, a dock you have already paired with in the past), you can right-click the tray icon and choose Connect to . Right-clicking when there is more than one paired dock in range, or no paired docks, will give you the option to open the Wireless Dock Manager (View available docks), where you can choose your desired dock from the list.
WiGig Application User Manual for Win 7/8/8.1 Figure 3-11 Note: 2. Dock disconnection screen Disconnecting by getting out of range (auto-disconnect) is experienced by the system as a USB surprise-removal event. While Windows has become better and better over the years with handling surprise removals, there is still always a chance of data loss/corruption when surprise-removing USB Mass Storage devices connected to the dock (other devices, such as HID, USB LAN, USB audio, etc., do not suffer).
WiGig Application User Manual for Win 7/8/8.1 3. Another method to manually disconnect is to press down and hold the activity button on the dock for more than four seconds. This method is especially useful for closed-lid operations, or if you are trying to manually disconnect a system where you cannot access the Wireless Dock Manager (like when the system is locked and you do not know the password).
WiGig Application User Manual for Win 7/8/8.1 2. Choose the first menu option Disable WiGig. A warning will show up, similar to the one in Figure 3-15 (depending on whether you are currently connected or not). Figure 3-15 Disable WiGig warning screen 3. Choose Yes to disable WiGig. 4. When WiGig is disabled, you cannot find and connect to wireless docks; the screen shown in Figure 3-16 comes up. Disabling minimizes the power consumption of the WiGig radio in the client. Figure 3-16 5.
WiGig Application User Manual for Win 7/8/8.1 3.2 1. Changing dock settings To access the dock settings, click the Dock Management button on the main Wireless Dock Manager screen while connected to a dock, as shown in Figure 3-17. Figure 3-17 2. This will open up the Dock Management screen, as shown in Figure 3-18. Figure 3-18 3.
WiGig Application User Manual for Win 7/8/8.1 Note: The factory setting for dock name is a prefix Dock and an automatic suffix of the last four nibbles of the MAC address of the dock. This helps users to distinguish between similar docks whose names have not been customized. Once the user changes the dock name, the last four nibbles of the MAC address are no longer appended to it.
WiGig Application User Manual for Win 7/8/8.1 Figure 3-19 3. Dock software update required screen In addition, the OSD on the external monitor will show the following message in Figure 3-20. Figure 3-20 OSD update screen 4. Choosing No will disconnect. The user cannot connect and work with this dock without performing a software update. 5. Choosing Yes will start the dock software update process. A screen similar to the one in Figure 3-21 will be presented, with the bar indicating progress.
WiGig Application User Manual for Win 7/8/8.1 Figure 3-21 6. During the software update process, the dock LED changes color (color is specific to dock vendor), and the OSD will show the screen in Figure 3-22; the screen should have progress bars. Figure 3-22 7. 3.
WiGig Application User Manual for Win 7/8/8.1 Figure 3-23 Advanced diagnostics window 3.5 Managing docks User may manage docks he has previously connected to. For each dock, user may delete the dock or remove the autoconnect option. To manage docks, click on the Manage Remembered Dock dialog from the settings button, as shown in Figure 3-24 and Figure 3-25. Figure 3-24 User Guide 26 Choose manage remember docks Intel Confidential Intel® Wireless Gigabit v2.0 October 2015 Document Number: 537178-3.
WiGig Application User Manual for Win 7/8/8.1 Figure 3-25 Manage dock autoconnect feature 3.6 Notification messages There are notification messages that inform user about the different application activities, like possible limitations or errors. 3.6.1 Unable to connect The unable to connect message is displayed if there is an error during the connection or pairing process, as shown in Figure 3-26. Figure 3-26 Unable to connect 3.6.
WiGig Application User Manual for Win 7/8/8.1 Figure 3-27 No docks found 3.6.3 Weak connection The weak connection message is displayed if the connection is weak but connected, as shown in Figure 3-28. Figure 3-28 Weak connection 3.6.4 WiGig not responding The WiGig is not responding message is displayed if WiGig driver or device is not responding, as shown in Figure 3-29. Figure 3-29 User Guide 28 WiGig not responding Intel Confidential Intel® Wireless Gigabit v2.
WiGig Application User Manual for Win 7/8/8.1 3.6.5 WiGig disabled – critical temperature The WiGig is disabled due to overheating message is displayed if WiGig driver or device is disabled due to a critical temperature error, as shown in Figure 3-30. Figure 3-30 WiGig disabled due to overheating 3.6.6 WiGig disabled by hardware RF kill switch The WiGig is disabled message is displayed if WiGig driver or device is disabled by the physical radio on/off switch, as shown in Figure 3-31.
WiGig Application User Manual for Win 7/8/8.1 3.6.7 WiGig disabled by airplane mode The WiGig is disabled message is displayed if WiGig driver or device is disabled because the device is in airplane mode, as shown in Figure 3-32. Figure 3-32 WiGig disabled by airplane mode § User Guide 30 Intel Confidential Intel® Wireless Gigabit v2.0 October 2015 Document Number: 537178-3.
WiGig Application User Manual for Windows 10* 4 WiGig Application User Manual for Windows 10* 4.1 User manual This chapter will be very similar to the previous chapter and will contain the Wigig behavior in Windows 10* OS. In Windows 10*, the OS will control the network related functionality. This include handling the radio state, scan, connect and manage the profiles. The OS will control this via the setting and the action center pane as will be demonstrate below.
WiGig Application User Manual for Windows 10* Figure 4-1 Welcome OSD screen 1. This screen remains until the connection is made. After a few minutes of inactivity, the monitor turns off to conserve power. Press the dock activity button to wake up the monitor and continue with the connection. 2. Enable WiGig on your client. WiGig comes disabled out-of-the-box to conserve battery life until the first time WiGig is needed.
WiGig Application User Manual for Windows 10* Figure 4-3 Network & Internet screen 4. Alternative way to get to this page is via settings: Network & Internet -> Airplane mode. 5. Once you set the WiGig radio button to on, you will be able to find docks in the range. In Windows 10* you will not be able to see the scan results in the Connect pane and not in the Intel® Wireless Dock Manager. 6.
WiGig Application User Manual for Windows 10* Figure 4-5 7. Choose the dock you wish to connect to by clicking it in the Connect pane. Note: 8. Connect pane Since this is the first time you are connecting to this dock, you will need to pair with it. Pairing creates a set of authentication keys that uniquely identify your client and dock pair, and allow them to communicate in a secured, encrypted manner over-the-air.
WiGig Application User Manual for Windows 10* Figure 4-6 9. Connect pane during connecting stage A corresponding OSD will appear on the external monitor, as shown in Figure 4-7. 10. Unlike in Win7/8/8.1, you will not see the indication to push the dock button on Intel® Wireless Dock Manager. October 2015 Document Number: 537178-3.3 Intel Confidential Intel® Wireless Gigabit v2.
WiGig Application User Manual for Windows 10* Figure 4-7 OSD screen 11. Press the activity button on the dock to complete the pairing process. The Connected screen appears shortly after, as shown in Figure 4-8. Figure 4-8 Note: Dock Connected screen A successful connection is also indicated by the dock LED (if available), and the external monitor and USB devices being connected and enumerated on your client (you will hear the Window’s gling-gling hot-plug audio cues).
WiGig Application User Manual for Windows 10* Figure 4-9 Dock connected screen Congratulations! You have made your first wireless docking connection. 4.1.3 Automatic connection default This section is not applicable in Win10 as in Win7/8/8.1. Instead in Windows 10* the dock will already be in automatically connect mode. 4.1.4 Automatic connections If a dock is set to connect automatically, WiGig will attempt to automatically connect to this dock once in range.
WiGig Application User Manual for Windows 10* client and complete the docking procedure. See Section 3.1.6 for more details. Ability to wake up the client from the dock is vendor specific and is configured in the BIOS. You can disable auto-connect by deselecting the Connect automatically check box while connected, as shown in Figure 4-10. Figure 4-10 Disabling the auto-connect setting You can only change a dock between automatic and manual connection when you are actively connected to the dock.
WiGig Application User Manual for Windows 10* 4.1.6 Automatic connection in S3 (depends on BIOS configuration) Same as in Section 3.1.6 4.1.7 Automatic connection in connected standby Same as in Section 3.1.7 4.1.8 Disconnecting from the dock Same as in Section 3.1.8. The only differentiation is in order to manually disconnect, the user cannot disconnect from the Intel® Wireless Dock Manager but instead has to do it from the Connect pane. 4.1.9 Disabling and enabling WiGig 1.
WiGig Application User Manual for Windows 10* 1. When connecting to the dock, the Wireless Dock Manager might inform the user of mandatory dock software update. 2. On Mandatory dock software updates, you will get a toast notifying that the dock update is required Figure 4-12. Figure 4-12 Dock update required toast 3. Clicking on this toast will pop up the Intel® Wireless Dock Manager application. 4.
WiGig Application User Manual for Windows 10* Figure 4-13 Remove device Figure 4-14 Remove Device approval October 2015 Document Number: 537178-3.3 Intel Confidential Intel® Wireless Gigabit v2.
WiGig Application User Manual for Windows 10* 4.6 Notification messages There are notification messages that inform user about the different application activities, like possible limitations or errors. 4.6.1 Not found In case no device can be found the Connect pane will return with a request to verify that the RF is on. See Figure 4-15. Figure 4-15 User Guide 42 Device not found Intel Confidential Intel® Wireless Gigabit v2.0 October 2015 Document Number: 537178-3.
WiGig Application User Manual for Windows 10* 4.6.2 Try Connecting your device again In case there was a problem in the pairing flow (before the user has the dock profile) the Connect pane will return with an error Try connecting your device again Figure 4-16. Figure 4-16 Try connecting your device again October 2015 Document Number: 537178-3.3 Intel Confidential Intel® Wireless Gigabit v2.
WiGig Application User Manual for Windows 10* 4.6.3 Couldn’t connect In case there was a problem in the connecting flow (after the user has the dock profile) the Connect pane will return with an error Couldn’t connect Figure 4-17. Figure 4-17 Couldn’t connect 4.6.4 Weak connection The weak connection toast is displayed if the connection is weak but connected, as shown in Figure 4-18.
WiGig Application User Manual for Windows 10* Figure 4-18 Weak connection toast Figure 4-19 Weak connection screen 4.6.5 WiGig disabled – critical temperature In case the WiGig is disabled due to overheating, toast will be popup Figure 4-20. In addition in case the Intel® Wireless Dock Manager application is open it will notify the user about this state as describe in Figure 4-21. Figure 4-20 WiGig disabled due to overheating toast October 2015 Document Number: 537178-3.
WiGig Application User Manual for Windows 10* Figure 4-21 WiGig disabled due to overheating screen § User Guide 46 Intel Confidential Intel® Wireless Gigabit v2.0 October 2015 Document Number: 537178-3.
The Wireless Dock and Multiple Displays 5 The Wireless Dock and Multiple Displays 5.1 Intel® WiGig A/V wireless capabilities Intel® WiGig is seen by the Intel® Display Driver as a DP V1.2 Branch device. It advertises its capabilities to the driver using standard DisplayPort V1.2a tools. The capabilities include A/V bandwidth, as well as other capabilities related to the internal A/V subsystem. Intel® WiGig HW can support up to two A/V streams.
The Wireless Dock and Multiple Displays 5.2 User experience when connecting more than two displays to the wireless dock The driver initially selects two default displays. These will be the displays connected to the output ports #1 and #2 of the MST hub device. The display connected to port #3 will not be used and will not be seen on the OS resolution manager. The Intel® Display Driver generates a popup window stating: DisplayPort Topology Notification. A new DisplayPort Topology has been identified.
The Wireless Dock and Multiple Displays Figure 5-2 Windows screen resolution manager The same behavior occurs when the user uses the Intel® Graphics Control Panel Display tab (see Figure 5-3). On this screen only the two displays selected in the Topology Manager will be seen. October 2015 Document Number: 537178-3.3 Intel Confidential Intel® Wireless Gigabit v2.
The Wireless Dock and Multiple Displays Figure 5-3 Graphics control panel § User Guide 50 Intel Confidential Intel® Wireless Gigabit v2.0 October 2015 Document Number: 537178-3.
Intel® WiFi Adapter Information Guide Intel® WiFi Adapter Information Guide This version of Intel® PROSet/Wireless WiFi Software is compatible with the adapters listed below. However, note that newer features provided in this software release are generally not supported for older, legacy adapters. The following adapters are supported on this release for Windows* 8 and Windows* 8.
Intel® WiFi Adapter Information Guide This guide contains basic information about Intel adapters. It includes information about several adapter properties that you can set to control and enhance the performance of your adapter with your particular wireless network and environment. Intel® wireless adapters enable fast connectivity without wires for desktop and notebook PCs.
Intel® WiFi Adapter Information Guide configuration do not cause the EMC and radio operation to be non-compliant." January 7, 2014 index.
Adapter Settings Back to Contents Adapter Settings The Advanced tab displays the device properties for the WiFi adapter installed on your computer. How to Access At the Intel® PROSet/Wireless WiFi Connection Utility, Advanced Menu click Adapter Settings. Select the Advanced tab. WiFi Adapter Settings Description Name Description 802.11ac Mode The 802.11ac standard builds on 802.11n standard. 802.
Adapter Settings AMP Fi) as the high-speed transport. If disabled, Bluetooth HS is turned off. HT Mode/VHT This settings lets you select HT Mode (High Throughput mode), VHT Mode (Very High Throughput Mode/Disabled Mode) or to disable both modes. HT Mode supports 802.11n compatibility, whereas VHT Mode supports 802.11ac compatibility. Fat Channel Intolerant This setting communicates to access points that this WiFi adapter does not prefer 40MHz channels in the 2.4GHz band.
Adapter Settings hoc) mode is used. Wake on Magic This setting, enabled, wakes the computer from a sleep state when it receives a "magic packet" Packet from a sending computer. The magic packet contains the MAC address of the intended destination computer. Enabling turns on Wake on Magic Packet. Disabling turns off Wake on Magic Packet. Disabling this only disables the magic packet feature, not Wake on Wireless LAN.
Regulatory Information Back to Contents Regulatory Information This section provides regulatory information for the following wireless adapters: Intel® Centrino® Wireless-N 100 Intel® Centrino® Wireless-N 105 Intel® Centrino® Wireless-N 130 Intel® Centrino® Wireless-N 135 Intel® Centrino® Wireless-N 1000 Intel® Centrino® Wireless-N 1030 Intel® Centrino® Wireless-N 2200 Intel® Centrino® Wireless-N 2230 Intel® Centrino® Wireless-N + WiMAX 6150 Intel® Centrino® Advanced-N 6200 Intel® Centrino® Advanced-N 620
Regulatory Information found in OET Bulletin 65, supplement C, 2001, and ANSI/IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCC’s recommended limits. The following safety precautions should be observed: Do not touch or move antenna while the unit is transmitting or receiving.
Regulatory Information IEEE 802.16e-2005 Wave 2 compliant Wireless Fidelity certification, as defined by the Wi-Fi Alliance WiMAX certification as defined by the WiMAX Forum The Wireless Adapter and Your Health The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones.
Regulatory Information as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations. Safety Approval Considerations This device has been safety approved as a component and is for use only in complete equipment where the acceptability of the combination is determined by the appropriate safety agencies.
Regulatory Information 在5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備 限於室內使用。 Radio Approvals To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer's OEM Regulatory Guidance document. Modular Regulatory Certification Country Markings A list of countries requiring regulatory markings is available.
Regulatory Information permitted. Any changes or modification to Intel® wireless adapters by OEMs, integrators or other third parties will void authorization to operate the adapter. Antenna Type and Gains Only antennas of the same type and with equal or less gains as shown below may be used with the Intel® wireless adapters. Other types of antennas and/or higher gain antennas may require additional authorization for operation. Antenna Type Antenna Location (Main/Aux PIFA 2.4GHz 2.6GHz 5.2GHz 5.5GHz 5.
Regulatory Information violation of government regulations that may arise from the user failing to comply with these guidelines. Local Restriction of 802.11a, 802.11b, 802.11g, 802.11n, and 802.11e Radio Usage The following statement on local restrictions must be published as part of the compliance documentation for all 802.11a, 802.11b, 802.11g and 802.11n products. Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.
Regulatory Information The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC certified equipment. The wireless adapter meets the Human Exposure limits found in OET Bulletin 65, supplement C, 2001, and ANSI/IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCC’s recommended limits.
Regulatory Information IEEE Std. 802.11n compliant Standard on Wireless LAN IEEE Std. 802.11ac draft compliant on Wireless LAN Wireless Fidelity certification, as defined by the Wi-Fi Alliance The Wireless Adapter and Your Health The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones.
Regulatory Information Reorient or relocate the receiving antenna of the equipment experiencing the interference. Increase the distance between the wireless adapter and the equipment experiencing the interference. Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment experiencing the interference is connected. Consult the dealer or an experienced radio/TV technician for help.
Regulatory Information point. Pour se conformer aux conditions d'exposition de RF toutes les antennes devraient être localisées à une distance minimum de 20 cm, ou la distance de séparation minimum permise par l'approbation du module, du corps de toutes les personnes. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.
Regulatory Information Korea 해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없음. 해당 무선 설비는 5150-5250MHz 대역에서 실내에서만 사용할 수 있음. Mexico La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
Regulatory Information To determine whether you are allowed to use your wireless network device in a specific country, please check to see if the radio type number that is printed on the identification label of your device is listed in the manufacturer's OEM Regulatory Guidance document. Modular Regulatory Certification Country Markings A list of countries requiring regulatory markings is available. Note that the lists include only countries requiring marking but not all certified countries.
Regulatory Information separation distance Intel® Centrino® Wireless-N 100 9 mm Intel® Centrino® Wireless-N 105 9 mm Intel® Centrino® Wireless-N 130 8 mm Intel® Centrino® Wireless-N 135 9 mm Intel® Centrino® Wireless-N 1000* 20 mm Intel® Centrino® Wireless-N 1030 8 mm Intel® Centrino® Wireless-N 2200 9 mm Intel® Centrino® Wireless-N 2230 6 mm Intel® Centrino® Advanced-N 6200* 20 mm Intel® Centrino® Advanced-N 6205 12 mm Intel® Centrino® Advanced-N 6230 12 mm Intel® Centrino® Advanced-
Regulatory Information modification of the devices included with the wireless adapter kit or the substitution or attachment of connecting cables and equipment other than that specified by Intel Corporation. The correction of interference caused by such unauthorized modification, substitution or attachment is the responsibility of the user.
Specifications Back to Contents Specifications This section provides specification information for the family of Intel® wireless adapters. The following list may not be all inclusive.
Specifications IEEE 802.11n Data Rates MIMO Configuration: 1X1 IEEE 802.11g Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps IEEE 802.11b Data Rates 11, 5.5, 2, 1 Mbps Tx/Rx: 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps Bluetooth Support Intel® Centrino® Intel® Centrino® Intel® Centrino® Intel® Centrino® 3.0 +HS) Wireless-N Wireless-N Wireless-N Wireless-N 100: 105: 130: 135: None None Bluetooth 2.1, 2.1 + EDR, 3.0, 3.
Specifications Wireless Medium 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. IEEE 802.11n Data Rates 300, 270, 243, 240, 180, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Mbps IEEE 802.11g Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps IEEE 802.11b Data Rates 11, 5.
Specifications Rates Bluetooth Support Intel® Centrino® Wireless-N 2200: None Intel® Centrino® Wireless-N 2230: Bluetooth 4.0 (Bluetooth Low-Energy and Bluetooth 3.0 +HS) General Operating Systems Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (32-bit and 64-bit) Wi-Fi Alliance* certification Wi-Fi* certification for 802.11b, 802.11g, 802.
Specifications Tx/Rx (Mbps): 300, 270, 243, 240, 216.7, 195, 180, 173.3, 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 Intel® Centrino® Wireless-N 1030: Rx (Mbps): 300, 270, 243, 240, 180 Rx/Tx (Mbps): 150, 144, 135, 130, 120, 117, 115.5, 90, 86.667, 72.2, 65, 60, 57.8, 45, 43.3, 30, 28.9, 21.7, 15, 14.4, 7.2 IEEE 802.11a Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps IEEE 802.11g Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps IEEE 802.
Specifications Frequency Modulation 5 GHz (802.11a/n) 2.4 GHz (802.11b/g/n) Frequency band 5.15 GHz - 5.85 GHz (dependent on country) 2.400 - 2.4835 GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK Wireless Medium 5 GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4 GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. IEEE 802.
Specifications Frequency Modulation Intel® Centrino® Advanced-N + WiMAX 6250 Intel® Centrino® Wireless-N + WiMAX 6150 2.4 GHz (802.11b/g/n), 5 GHz (802.11a/n) 2.4 GHz (802.11b/g/n) Frequency band 5.15 GHz - 5.85 GHz (dependent on country) 2.400 - 2.4835 GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK Wireless Medium 5 GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.
Specifications Windows* 7 (32-bit and 64-bit) Windows* 8 (32-bit and 64-bit) Windows* 8.1 (32-bit and 64-bit) Standard Compliance 802.16e-2005 Corrigenda 2 (D4) WiMAX System Profile Feature set Intel® Centrino® Wireless-N + WiMAX 6150: Mobile WiMAX release 1, Wave II. Supports 3A and 1A/B profiles Intel® Centrino® Advanced-N + WiMAX 6250: Mobile WiMAX release 1, Wave II.
Specifications Connector Interface 52-pin Mini Card edge connector Voltage 3.3 V Operating Temperature 0 to +80 degrees Celsius Humidity 50% to 95% non-condensing (at temperatures of 25 ºC to 35 ºC) Frequency Modulation 5 GHz (802.11a/n) 2.4 GHz (802.11b/g/n) Frequency band 5.15 GHz - 5.85 GHz (dependent on country) 2.400 - 2.
Specifications Antenna Interface Connector Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 Antenna Diversity On-board diversity IEEE 802.11 802.11ac, 802.11abgn, 802.11d, 802.11e, 802.11i, 802.11h, 802.11w Networking Standards Operating Temperature 0 to +80 degrees Celsius Humidity 50% to 95% non-condensing (at temperatures of 25 ºC to 35 ºC) Frequency Modulation 5GHz (802.11ac/n) Frequency band 5.15GHz - 5.85GHz (dependent on country) 2.400 - 2.
Specifications Intel® Wireless-N 7260 Form Factors Half-Mini Card, M.2 (Next Generation Form Factor - NGFF) Electrical interfaces PCIe, USB 2.0 for both form factors Antenna Interface Hirose U.FL-R-SMT mates with cable connector U.FL-LP-066 Connector Antenna Diversity On-board diversity IEEE 802.11 Networking Standards Intel® Dual Band Wireless-N 7260 Model Model Model Model 7260HMW AN - 802.11agn, 2x2, Bluetooth 4.0, PCIe, USB, HMC 7260NGW AN - 802.11agn, 2x2, Bluetooth 4.0, PCIe, USB, M.
Specifications General Operating Systems Windows* 7 (32-bit and 64-bit), Windows 8 (32-bit and 64-bit), Windows* 8.1 (64-bit) Wi-Fi Alliance* certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections. Architecture Infrastructure and SoftAP; Supports simultaneous Client and SoftAP modes Cisco Compatible Extensions certification Cisco Compatible Extensions, v4.
Specifications IEEE 802.11b Data Rates 11, 5.5, 2, 1 Mbps Bluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) General Operating Systems Windows* 7 (32-bit and 64-bit), Windows 8 (32-bit and 64-bit), Windows* 8.1 (64-bit) Wi-Fi Alliance* certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections.
Specifications Rates IEEE 802.11g Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps IEEE 802.11b Data Rates 11, 5.5, 2, 1 Mbps Bluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE) General Operating Systems Windows* 7 (32-bit and 64-bit), Windows* 8 (32-bit and 64-bit), Windows* 8.1 (64-bit) Wi-Fi Alliance* certification Wi-Fi CERTIFIED* for 802.11ac, a/b/g, n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0, Protected Management Frames. Wi-Fi Direct* for peer-to-peer device connections.
Specifications adapters) Frequency band 5.15GHz - 5.85GHz (dependent on country) 2.400 - 2.4835GHz (dependent on country) Modulation BPSK, QPSK, 16 QAM, 64 QAM CCK, DQPSK, DBPSK Wireless Medium 5GHz UNII: Orthogonal Frequency Division Multiplexing (OFDM) 2.4GHz ISM: Orthogonal Frequency Division Multiplexing (OFDM) Channels All channels as defined by the relevant specification and country rules. 802.
Important Information Back to Contents Important Information Safety Information Third Party Software Notices Safety Information It is important that you read the safety information regarding your WiFi adapter. Please see the User's Guide for safety and regulatory notices. Third Party Software Notices Portions of Intel® PROSet/Wireless WiFi Connection Utility include software under the following terms: OpenSSL License Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.
Important Information This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscape's SSL. This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code.
Important Information Adapter Driver Portions of the driver include software under the following terms: WPA Supplicant Copyright (c) 2003-2007, Jouni Malinen and contributors. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Important Information Portions of this software contain the standard version of "Odd Button" licensed under the Artistic License. The source code for "Odd Button" may be found online at http://sourceforge.net/projects/oddbutton. Back to Top Back to Contents Trademarks and Disclaimers safety.
Customer Support Back to Contents Customer Support Intel support is available online or by telephone. Available services include the most up-to-date product information, installation instructions about specific products, and troubleshooting tips. Online Support Technical Support: http://www.intel.com/support Network Product Support: http://www.intel.com/network Corporate Web Site: http://www.intel.com Back to Top Back to Contents Trademarks and Disclaimers support.
Warranty Information Back to Contents Warranty Information One-Year Limited Hardware Warranty Limited Warranty In this warranty statement, the term "Product" applies to the wireless adapters listed in Specifications.
Warranty Information credit card information; (2) proof of purchase; (3) model name and product identification number found on the Product; and (4) an explanation of the problem. The Customer Service Representative may need additional information from you depending on the nature of the problem.
Warranty Information Back to Top Back to Contents Trademarks and Disclaimers warranty.
Glossary Back to Contents Glossary Term Definition 802.11 The 802.11 standard refers to a family of specifications developed by the IEEE for wireless LAN technology. The 802.11 specifies an over-the-air interface between a wireless client and a base station or between two wireless clients and provides 1 or 2 Mbps transmission in the 2.4 GHz band using either frequency hopping spread spectrum (FHSS) or direct sequence spread spectrum (DSSS). 802.11a The 802.
Glossary CA (Certificate Authority) A corporate certification authority implemented on a server. In addition, Internet Explorer's certificate can import a certificate from a file. A trusted CA certificate is stored in the root store. CCX (Cisco Compatible eXtension) Cisco Compatible Extensions Program ensures that devices used on Cisco wireless LAN infrastructure meet the security, management and roaming requirements. Certificate Used for client authentication.
Glossary network EAP-TLS A type of authentication method that uses EAP and a security protocol called the Transport Layer Security (TLS). EAP-TLS uses certificates that use passwords. EAP-TLS authentication supports dynamic WEP key management. EAP-TTLS A type of authentication method that uses EAP and Tunneled Transport Layer Security (TTLS). EAP-TTLS uses a combination of certificates and another security method such as passwords.
Glossary TLS certificate on the RADIUS server, but unlike EAP-TLS there is no requirement to have a certificate on the client. PEAP has not been ratified by the IETF. The IETF is currently comparing PEAP and TTLS (Tunneled TLS) to determine an authentication standard for 802.1X authentication in 802.11 wireless systems.
Glossary fixing the flaws of WEP. TLS (Transport A type of authentication method using the Extensible Authentication Protocol (EAP) and a security Layer Security) protocol called the Transport Layer Security (TLS). EAP-TLS uses certificates which use passwords. EAP-TLS authentication supports dynamic WEP key management. The TLS protocol is intended to secure and authenticate communications across a public network through data encryption.
Glossary hashing algorithm to scramble the encryption keys and adds an integrity-checking feature to ensure that the keys have not been tampered with. User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computer's hardware-specific MAC address, which is relatively simple to be sniffed out and stolen.
