User's Manual
RevisionHistory
Rev.1.2,Feb.2015 43/44
HardwareUser
Guide,DocumentNumber:N/A
The Intel® wireless adapter FCC Grant of Authorization describes any
limited conditions of modular approval.
The Intel® wireless adapters must be operated only within countries that
have been approved for operation.
Changes or modification to Intel® wireless adapters by OEMs, integrators
or other third parties is not permitted. Any changes or modification to
Intel® wireless adapters by OEMs, integrators or other third parties will
void authorization to operate the adapter.
SimultaneousTransmissionofIntel®WirelessAdapterswith
OtherIntegratedorPlug‐InTransmitters
Based upon FCC Knowledge Database publication number
616217
https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm
?id=33240&switch=P, when there are multiple transmitting
devices installed in a host device, an RF exposure transmitting
assessment shall be performed to determine the necessary
application and test requirements. OEM integrators must
identify all possible combinations of simultaneous transmission
configurations for all transmitters and antennas installed in the
host system. This includes transmitters installed in the host as
mobile devices (>20 cm separation from user) and portable
devices (<20 cm separation from user). OEM integrators
should consult the actual FCC KDB 616217 document for all
details in making this assessment to determine if any additional
requirements for testing or FCC approval is necessary.