User Guide ThinkPad E450 and E455
Note: Before using this information and the product it supports, be sure to read and understand the following: • Safety, Warranty, and Setup Guide • Regulatory Notice • “Important safety information” on page vi • Appendix E “Notices” on page 149 The Safety, Warranty, and Setup Guide and the Regulatory Notice have been uploaded to the Web site. To refer to them, go to http://www.lenovo.com/ThinkPadUserGuides and follow the instructions on the screen. First Edition (October 2014) © Copyright Lenovo 2014.
Contents Read this first . . . . . . . . . . . . . . v Important safety information . . . . . . . . . . vi Conditions that require immediate action . . vii Safety guidelines . . . . . . . . . . . . vii Chapter 1. Product overview . . . . . . 1 Locating computer controls, connectors, and indicators. . . . . . . . . . . . . . . . . Front view. . . . . . . . . . . . . . . Right-side view. . . . . . . . . . . . . Left-side view . . . . . . . . . . . . . Bottom view . . . . . . . . . . . . . .
Updating your system UEFI BIOS . . . . . 68 Chapter 6. Preventing problems . . . 69 General tips for preventing problems . . Making sure device drivers are current . Taking care of your computer . . . . . Cleaning the cover of your computer . . . . . . . . . . . . . . . . 69 70 71 72 Chapter 7. Troubleshooting computer problems . . . . . . . . . . . . . . . 75 Diagnosing problems . . . . . . . . . . . . Troubleshooting . . . . . . . . . . . . . . Computer stops responding . . . . . . .
Japan recycling statements . . . . . . . . . Recycling information for Brazil . . . . . . . . Battery recycling information for the European Union . . . . . . . . . . . . . . . . . . Battery recycling information for Taiwan . . . . . Battery recycling information for the United States and Canada . . . . . . . . . . . . . . . . Recycling information for China . . . . . . . . 139 140 140 141 141 141 Appendix C. Restriction of Hazardous Substances Directive (RoHS) . . . .
iv User Guide
Read this first Be sure to follow the important tips given here to get the most use and enjoyment out of your computer. Failure to do so might lead to discomfort or injury, or cause your computer to fail. Protect yourself from the heat that your computer generates. When your computer is turned on or the battery is charging, the base, the palm rest, and some other parts may become hot. The temperature they reach depends on the amount of system activity and the level of charge in the battery.
Protect your computer and data when moving it. Before moving a computer equipped with a hard disk drive or hybrid drive, do one of the following: • Turn it off. • Put it in sleep mode. • Put it in hibernation mode. This will help to prevent damage to the computer, and possible loss of data. Handle your computer gently. Do not drop, bump, scratch, twist, hit, vibrate, push, or place heavy objects on your computer, display, or external devices. Carry your computer carefully.
Conditions that require immediate action Products can become damaged due to misuse or neglect. Some product damage is serious enough that the product should not be used again until it has been inspected and, if necessary, repaired by an authorized servicer. As with any electronic device, pay close attention to the product when it is turned on. On very rare occasions, you might notice an odor or see a puff of smoke or sparks vent from your product. Or you might hear sounds like popping, cracking or hissing.
sure that the power is turned off and that the product is unplugged from any power source. If you have any questions or concerns, contact the Customer Support Center. Although there are no moving parts in your computer after the power cord has been disconnected, the following warnings are required for your safety. CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Before you open the computer cover, turn off the computer and wait several minutes until the computer is cool.
Extension cords and related devices Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you use are rated to handle the electrical requirements of the product. Never overload these devices. If power strips are used, the load should not exceed the power strip input rating. Consult an electrician for more information if you have questions about power loads, power requirements, and input ratings.
External devices CAUTION: Do not connect or disconnect any external device cables other than USB and 1394 cables while the computer power is on; otherwise, you might damage your computer. To avoid possible damage to attached devices, wait at least five seconds after the computer is shut down to disconnect external devices. General battery notice DANGER Personal computers manufactured by Lenovo contain a coin-cell battery to provide power to the system clock.
Products containing manganese dioxide lithium coin-cell batteries may contain perchlorate. Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate Built-in rechargeable battery notice DANGER Do not attempt to replace the built-in rechargeable lithium-ion batteries. Contact Lenovo Support for factory replacement. Heat and product ventilation DANGER Computers, ac power adapters, and many accessories can generate heat when turned on and when batteries are charging.
Electrical current safety information DANGER Electric current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: • Do not use your computer during a lightning storm. • Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. • Connect all power cords to a properly wired and grounded electrical outlet. • Connect to properly wired outlets any equipment that will be attached to this product.
Note: For products with mercury-containing fluorescent lamps (for example, non-LED), the fluorescent lamp in the liquid crystal display (LCD) contains mercury; dispose of according to local, state, or federal laws. Using headphones or earphones CAUTION: Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the equalizer to maximum increases the earphone and headphone output voltage and the sound pressure level.
xiv User Guide
Chapter 1. Product overview This chapter provides information about connector locations, important product labels, computer features, specifications, operating environment, and preinstalled programs.
1 Microphones The built-in microphones capture sound and voice when used with a program capable of handling audio. Depending on your model, your computer might come with one microphone. 2 Camera Some models have an integrated camera. Use the camera to take pictures or hold a video conference. For details, see “Using the camera” on page 37. 3 Power button Press the power button to turn on the computer or put the computer into sleep mode.
9 Screen (multi-touch screen available on some models) For more information, see “Using the multi-touch screen” on page 19. Right-side view Figure 2. ThinkPad E450 and E455 right-side view 1 USB 3.0 connectors 2 High-Definition Multimedia Interface (HDMI™) connector 3 Ethernet connector 4 ac power connector 5 Lenovo OneLink connector 1 USB 3.0 connectors The Universal Serial Bus (USB) 3.0 connectors are used for connecting USB-compatible devices, such as a USB keyboard or a USB mouse.
DANGER To avoid the risk of electrical shock, do not connect the telephone cable to the Ethernet connector. You can only connect an Ethernet cable to this connector. The Ethernet connector has two indicators that show the status of the network connection. When the green indicator is on, the computer is connected to a LAN. When the yellow indicator blinks, data is being transmitted.
1 Security-lock slot To protect your computer from theft, purchase a security cable lock that fits this security-lock slot to lock your computer to a stationary object. 2 Fan louvers The fan louvers and the internal fan enable air to circulate in the computer to ensure proper cooling, especially the cooling of the microprocessor. Note: To ensure proper airflow, do not place any obstacle in front of the fan louvers.
Bottom view Figure 4. ThinkPad E450 and E455 bottom view 1 Wireless-LAN-card slot 2 Memory-upgrade slots 3 Speakers 4 Built-in battery 5 Storage drive 1 Wireless LAN card slot Your computer might have a wireless LAN card installed for you to establish wireless LAN connections. 2 Memory-upgrade slot You can increase the amount of memory in your computer by installing a memory module in the memory-upgrade slot. Memory modules are available as options from Lenovo.
1 Fn Lock indicator The Fn Lock indicator shows the status of Fn Lock function. For more information, see “Special keys ” on page 21. 2 Speaker-mute indicator When the speaker-mute indicator is on, the speakers are muted. 3 Microphone-mute indicator When the microphone-mute indicator is on, the microphones are muted. 4 Camera-status indicator When the camera-status indicator is on, the camera is in use.
• Off: The computer is off or in hibernation mode. • On: The computer is on (in normal mode).
The FCC ID and IC Certification number label is affixed on the wireless LAN card 1 installed in the wireless communication card slot of the computer. The following figure shows the location of the FCC ID and IC Certification number label of your computer. To remove the wireless LAN card for repair or replacement, see “Replacing a wireless LAN card” on page 111. Note: Use only Lenovo-authorized wireless communication cards for the computer.
The following figure shows the location of the Certificate of Authenticity label on the bottom cover: Genuine Microsoft label The Genuine Microsoft label is provided on models that are licensed to use a Windows 8.1 operating system. The version of the operating system is printed on the label. If your computer model is licensed to use the Windows 8.1 Pro operating system, that license also permits you to use the Windows 7 Professional operating system in place of the Windows 8.
• Double data rate 3 low voltage synchronous dynamic random access memory modules (DDR3 LV SDRAM) Storage device • 2.5-inch form factor, 7-mm height hard disk drive • 2.5-inch form factor, 7-mm height solid-state drive • 2.5-inch form factor, 7-mm height hybrid drive Display The color display uses the Thin Film Transistor (TFT) technology. • Size: 14.0 inches (355.
• Width: 339 mm (13.35 inches) • Depth: 239 mm (9.41 inches) • Height: – 24.4 mm (9.61 inches) for the non-touch model – 26.4 mm (10.39 inches) for the touch model Heat output • 45W (154 Btu/hr) or 65 W (222 Btu/hr) maximum (depending on the model) Power source (ac power adapter) • Sine-wave input at 50 to 60 Hz • Input rating of the ac power adapter: 100 to 240 V ac, 50 to 60 Hz Operating environment This section provides information about the operating environment of your computer.
To learn more about the programs and other computing solutions offered by Lenovo, go to: http://www.lenovo.com/support Accessing Lenovo programs on the Windows 7 operating system You can access Lenovo programs on the Windows 7 operating system through Windows Search or from Control Panel. The icon name displayed in the search result or Control Panel might be different from the program name.
Accessing Lenovo programs on the Windows 8.1 operating system You can access Lenovo programs on the Windows 8.1 operating system from the Start screen or the Apps screen. Press the Windows key to go to the Start screen. Click a Lenovo program to launch it. If you cannot find the program you need, click the arrow icon to go to the Apps screen. Find the desired program in the list or search for the program in the search box.
• Lenovo ThinkVantage Tools (Windows 7) The Lenovo ThinkVantage Tools program helps you work more easily and securely by providing easy access to various program, such as Lenovo Fingerprint Manager, Lenovo Solution Center, and so on. • Message Center Plus (Windows 7) The Message Center Plus program automatically displays messages to inform you about important notices from Lenovo, such as alerts on system updates and alerts on conditions that require your attention.
• Lenovo Microphone Mute (Windows 7 and Windows 8.1) The Lenovo Microphone Mute program enables you to set which recording devices will be controlled by the microphone-mute key on your computer. By pressing the microphone-mute key, you can mute or unmute the recording devices that you have selected in the Lenovo Microphone Mute program. • Lenovo QuickCast (Windows 7 and Windows 8.
Chapter 2. Using your computer This chapter provides information on using some of the computer components.
• For Windows 7: Open the Start menu, then click Shut down. • For Windows 8.1: Do one of the following: – Go to the Start screen by pressing the Windows key, click the power icon in the top-right corner of the screen, then click Shut down. – Move your pointer to the top-right or bottom-right corner of the screen to display the charms. Then click Settings ➙ Power ➙ Shut down. Note: You also can open the Settings charm by pressing the settings key .
• Follow the “General tips for preventing problems” on page 69. • Diagnose problems yourself by using the preinstalled diagnostic software. • Check for recovery solutions in Chapter 8 “Recovery overview” on page 93. Print the following sections and keep them with your computer in case you are unable to access this online user guide when necessary.
Touch gesture (touch models only) Description Touch: Move two fingers closer together. Mouse action: Press the Ctrl key while scrolling the mouse wheel backward. Function: Zoom out. Supported operating systems: Windows 7 and Windows 8.1 Touch: Move two fingers farther apart. Mouse action: Press the Ctrl key while scrolling the mouse wheel forward. Function: Zoom in. Supported operating systems: Windows 7 and Windows 8.
Touch gesture (touch models only) Description Touch: Swipe up to the top edge. Mouse action: Click the downward arrow ( of the Start screen. ) located near the bottom-left corner Function: View all apps on the Start screen. Supported operating system: Windows 8.1 Touch: Swipe in from the top or bottom edge of the Start screen, tap Customize, and then tap the desired icon. Mouse action: Right-click a blank area on the Start screen, click Customize, and then click the desired icon.
Function keys and key combinations The keyboard has several function keys, which consist of the Fn key 1 and the other function keys 2 . • + : Press Fn+Esc to enable or disable the Fn Lock function. When the Fn Lock function is disabled: The Fn Lock indicator is off (default mode). To initiate the special function of each key, press the function keys directly. To input F1-F12, press the Fn key and the corresponding function key. When the Fn Lock function is enabled: The Fn Lock indicator turns on.
• : For Windows 8.1: Opens the Settings charm. For Windows 7: Opens Control Panel. • : For Windows 8.1: Opens the Search charm. For Windows 7: Opens Windows Search. • • : Views the programs that you have opened. : For Windows 8.1: Views all the programs. For Windows 7: Opens Computer. • Fn+B: Has the same function as the Break key. • Fn+P: Has the same function as the Pause key. • Fn+S: Has the same function as the SysRq key. • Fn+K: Has the same function as the ScrLK key.
Using the ThinkPad pointing device Depending on your preference, you can use the ThinkPad pointing device in one of the following modes: • TrackPoint mode • Trackpad mode • Classic TrackPoint mode To change a mode for the ThinkPad pointing device, see “Customizing the ThinkPad pointing device” on page 27. Note: By default, TrackPoint mode and Trackpad mode are both enabled. You can use either one of them.
Pointing Slide one finger across the surface of the trackpad to move the pointer accordingly. Scrolling Put two fingers on the trackpad and move them in the vertical or horizontal direction. Then you can scroll through the document, Web site, or apps. Ensure that you put two fingers slightly apart from each other. 1 Left-clicking Press the left-clicking zone to select or open an item. 2 Right-clicking Press the right-clicking zone to display a shortcut menu.
• Some gestures are only available in certain apps and modes of the ThinkPad pointing device. • When using two or more fingers, ensure that your fingers are slightly apart. Tapping Tap anywhere on the trackpad with one finger to select or open an item. Two-finger tapping Tap anywhere on the trackpad with two fingers to display a shortcut menu. Two-finger scrolling Put two fingers on the trackpad and move them in the vertical or horizontal direction.
Swiping from the top edge From the Start screen or the current app, swipe in from the top edge of the trackpad with one finger to display the command menu. Swiping from the top to the bottom edge Swipe from the top to the bottom edge of the trackpad with one finger to close the current app. Performing this gesture on the desktop closes the desktop and displays the Start screen. Swiping from the right edge Swipe in from the right edge of the trackpad with one finger to display the charms.
Power management When you use your computer away from electrical outlets, you depend on battery power to keep your computer running. Different computer components consume power at different rates. The more you use the power-intensive components, the faster you consume battery power. Spend more time unplugged with ThinkPad batteries. Mobility has revolutionized business by enabling you to take your work wherever you go.
3. For Low battery alarm or Critically low battery alarm, set the percentage of the power level and set the action. Note: If your computer enters sleep or hibernation mode when the battery is low, but the alarm message has not yet been displayed, the message will be displayed when the computer resumes. To resume normal operation, when the message is displayed, click OK. Using the ac power The power to run your computer can come either from the battery or from ac power.
Maximizing the battery life To maximize the life of the battery, do the following: • Use the battery until the charge is completely depleted. • Recharge the battery completely before using it. You can see whether the battery is fully charged from the battery status icon in the Windows notification area. • Always use power management features such as power-saving modes. Managing the battery power To achieve the best balance between performance and power saving, adjust your power plan settings.
programs that are running. When the computer enters hibernation mode, all open programs, folders, and files are saved to the hard disk drive, hybrid drive, or solid-state drive, and then the computer turns off. To put the computer into hibernation mode, do the following: – For Windows 7: Open the Start menu, then click the arrow next to the Shut down button. Click Hibernate from the menu displayed. – For Windows 8.
DANGER Do not attempt to disassemble or modify the battery. Attempting to do so can cause an explosion, or liquid leakage from the battery. A battery other than the one specified by Lenovo, or a disassembled or modified battery is not covered by the warranty. DANGER If the rechargeable battery is incorrectly replaced, there is danger of an explosion. The battery contains a small amount of harmful substances.
DANGER There is a danger of an explosion if the coin-cell battery is incorrectly placed. The lithium battery contains lithium and can explode if it is not properly handled, or disposed of. Replace only with a battery of the same type. To avoid possible injury or death, do not: (1) throw or immerse into water, (2) allow it to heat to more than 100°C (212°F), or (3) attempt to repair or disassemble it. Dispose of it as required by local ordinances or regulations and your company's safety standards.
2. Click the wireless-network-connection-status icon in the Windows notification area. A list of available wireless networks is displayed. 3. Double-click a network to connect to it. Provide required information if needed. For Windows 8.1: 1. Go to the desktop and click the wireless-network-connection-status icon in the Windows notification area. A list of available wireless networks is displayed. Note: To display the list, ensure that airplane mode (flight mode) is set to off. 2.
• Current location profile is connected. Access Connections wireless status icon • Power to the wireless radio is off. • Power to the wireless radio is on. No association. • Power to the wireless radio is on. No signal. • Power to the wireless radio is on. The signal strength of the wireless connection is excellent. • Power to the wireless radio is on. The signal strength of the wireless connection is marginal. • Power to the wireless radio is on.
Connecting an external display You can use either a wired display or a wireless display. The wired display can be connected to the HDMI, VGA, or mini DisplayPort connector by a cable. The wireless display can be added through the Wi-Di or Miracast function. • Connecting a wired display Note: When you connect an external monitor, a video interface cable with a ferrite core is required. 1.
Changing display settings You can change the display settings, such as the display resolution, font size, and so on. To change the display settings, do the following: 1. Go to Control Panel and click Appearance and Personalization. 2. Click Display for further configuration. 3. Click Apply. The change will take effect after you log off. Using audio features Your computer is equipped with the following items: • Speakers • Microphones • Combo audio connector, 3.5 mm (0.
• For Windows 8.1: Click Camera from the Start screen. When the camera is started, the green camera-in-use indicator turns on. You also can use the integrated camera with other programs that provide features such as photographing, video capturing, and video conferencing. To use the integrated camera with other programs, open one of the programs and start the photographing, video capturing, or video conferencing function.
2. Click Hardware and Sound. 3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. 4. From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts. 5. Follow the instructions on the screen. Removing a flash media card Attention: • Stop all the activities involving the card before removing it. Otherwise, data on the card might get damaged or lost.
40 User Guide
Chapter 3. Enhancing your computer This chapter provides instructions on how to use hardware devices to expand your computer capabilities. • “Finding ThinkPad options” on page 41 • “ThinkPad OneLink Dock” on page 41 • “ThinkPad OneLink Pro Dock” on page 42 Finding ThinkPad options If you want to expand the capabilities of your computer, Lenovo has a number of hardware accessories and upgrades to meet your needs.
2 USB 3.0 connector: Used to connect devices that are compatible with USB 3.0 and USB 2.0. 3 Always on USB connector: By default, the Always on USB connector enables you to charge some mobile digital devices and smartphones no matter when your computer is in sleep mode, hibernation mode, or is off. For more information, refer to the documentation that comes with the dock. 4 Combo audio connector: Used to connect headphones or a headset that has a 3.5-mm (0.14-inch), 4-pole plug.
Front view 1 Security-lock slot: To protect your dock from theft, you can purchase a security cable lock, such as a Kensington-style cable lock, that fits this security-lock slot to lock your dock to a desk, table, or other non-permanent fixture. 2 USB 3.0 connector: Used to connect devices that are compatible with USB 3.0 and USB 2.0.
1 USB 2.0 connectors: Used to connect devices that are compatible with USB 2.0. 2 USB 3.0 connectors: Used to connect devices that are compatible with USB 3.0 and USB 2.0. 3 Ethernet connector: Used to connect the dock to an Ethernet LAN. The indicators on this connector have the same function as the ones on the computer. 4 DisplayPort® connector: Used to attach a high-performance monitor, a direct-drive monitor, or other devices that use a DisplayPort connector.
Chapter 4. Security This chapter provides information about how to protect your computer from theft and unauthorized use.
If you set a power-on password, the password prompt is displayed on the screen whenever you turn on the computer. You must enter the correct password to start using the computer. Setting, changing, or removing a power-on password Before you start, print these instructions. To set, change, or remove a power-on password, do the following: 1. Turn off your computer. Wait for about five seconds, and then turn on the computer again. 2.
– Enabling or disabling the following features: – Wake on LAN and Flash over LAN – Lock UEFI BIOS Settings – Password at unattended boot – Boot Device List F12 Option – Boot Order Lock – Flash BIOS Updating by End-Users – Internal network device – Internal wireless device – Internal Bluetooth device – Internal Network Option ROM – Security mode – Fingerprint reader priority Notes: • The system administrator can set the same supervisor password on many ThinkPad notebook computers to make administration easie
Note: You might want to record your password and store it in a safe place. The next time you open the ThinkPad Setup program, you will be prompted to type your supervisor password to proceed. If you forget your supervisor password, Lenovo cannot reset your password. You must take your computer to a Lenovo reseller or a Lenovo marketing representative to have the system board replaced. Proof of purchase is required, and a fee will be charged for parts and service.
The next time you turn on your computer, type the user or master hard disk password to start your computer and access the operating system. Changing or removing a hard disk password To change or remove the hard disk password, do the following: • If you are in User + Master hard disk mode, you can select either User HDP or Master HDP to change the password, depending on your needs. – If you select User HDP mode, follow the following steps to change the user hard disk password: 1.
Hard disk security To protect passwords from unauthorized security attacks, refer to the following tips to maximize security: • Set a power-on password as well as a hard disk password for your internal hard disk drive, hybrid drive, or solid-state drive. Refer to the procedures in “Power-on password” on page 45 and “Hard disk passwords” on page 48. For security, a longer password is recommended.
1. Place the top joint of your finger on the sensor. 2. Apply light pressure and swipe your finger toward you across the reader in one smooth motion. Do not lift your finger when you are swiping it. Maintaining the fingerprint reader The following actions could damage the fingerprint reader or cause it not to work properly: • Scratching the surface of the reader with a hard, pointed object. • Scraping the surface of the reader with your fingernail or anything hard.
• The reader often fails to enroll or authenticate your fingerprint. If your finger has any of the following conditions, you might not be able to register or authenticate it: • Your finger is wrinkled. • Your finger is rough, dry, or injured. • Your finger is stained with dirt, mud, or oil. • The surface of your finger is different from when you enrolled your fingerprint. • Your finger is wet. • A finger is used that has not been enrolled.
If a Disk Encryption hard disk drive, a Disk Encryption hybrid drive, or an Encryption solid-state drive or is supported and installed in your computer, you can logically dispose of all the data on the drive in a short time by erasing the cryptographic key. The data encrypted with the old key is not physically erased but remains on the drive; however, it cannot be decrypted without the old key.
54 User Guide
Chapter 5. Advanced configuration This chapter provides the following information to help you configure the computer: • “Installing a new operating system” on page 55 • “Installing device drivers” on page 57 • “Using the ThinkPad Setup program” on page 57 Installing a new operating system In some situations, you might need to install a new operating system. This topic provides instructions on how to install a new operating system.
Country or region Code Country or region Code China SC Netherlands NL Denmark DK Norway NO Finland FI Spain SP France FR Sweden SV Germany GR Taiwan and Hong Kong TC Italy IT United States US Japan JP Installing the Windows 8.1 operating system Before you start, print these instructions.
Installing device drivers Device driver is the program that operates a particular hardware device of the computer. If a device does not perform well or you install a new device, you need to install or update the corresponding device driver. For example, if you use the Windows 7 operating system, to use the USB 3.0 connector, you need to download and install the USB 3.0 driver. To download the latest device drivers, do the following: 1. Go to http://www.lenovo.com/ThinkPadDrivers. 2.
• UEFI BIOS Date (Year-Month-Day) • Embedded Controller Version • ME Firmware Version (available on models with the Intel CPU) • Machine Type Model • System-unit serial number • System board serial number • Asset Tag • CPU Type • CPU Speed • Installed memory • UUID • MAC address (Internal LAN) • Preinstalled OS License • UEFI Secure Boot Config menu To change the configuration of your computer, select the Config tab from the ThinkPad Setup menu. The following table lists the Config menu items.
Table 3. Config menu items (continued) Menu item Submenu item (for Legacy Only boot mode or Both with Legacy first) UEFI IPv4 Network Stack (for UEFI Only boot mode or Both with UEFI first) UEFI IPv6 Network Stack (for UEFI Only boot mode or Both with UEFI first) UEFI PXE Boot Priority (for Both with UEFI first boot mode, and IPv6 and IPv4 stacks are both enabled.) USB USB UEFI BIOS Support Selection Comments • Enabled startup from an integrated network device.
Table 3. Config menu items (continued) Menu item Submenu item Selection Comments connectors will work as USB 2.0 connectors. Keyboard/Mouse Fn and Ctrl Key swap • Disabled • Enabled If you select Enabled, the Fn key works as the Ctrl key, and the Ctrl key works as the Fn key. Note: Even when Enabled is selected, you need to press the Fn key to resume the computer from sleep mode to normal operation.
Table 3. Config menu items (continued) Menu item Submenu item Selection • Balanced CPU Power Management • Disabled • Enabled Intel (R) Rapid Start Technology • Disabled • Enabled Enter after: • Immediately • 1 minute • 2 minutes • 5 minutes • 10 minutes • 15 minutes • 30 minutes • 1 hour Comments Note: This sub-menu is available on models with an Intel CPU. Enable or disable the power-saving feature that stops the microprocessor clock automatically when there are no computer activities.
Date and Time menu To change the date or time of your computer, select the Date/Time tab from the ThinkPad Setup menu. Then do the following: 1. Use the cursor keys to select System Date or System Time. 2. Type a date or time. Security menu To change the security settings of your computer, select the Security tab from the ThinkPad Setup menu. The following table lists the Security menu items. Default values are in boldface. Attention: The default configurations are already optimized for you.
Table 4. Security menu items (continued) Menu item Submenu item Selection Comments loads the operating system. To prevent unauthorized access, set the user authentication on the operating system. Password at Boot Device List • Disabled Password Count Exceeded Error • Disabled Set Minimum Length • Disabled If the Security password is set, this option is used to specify whether the Security password must be entered to display the F12 boot device list.
Table 4. Security menu items (continued) Menu item Submenu item Selection Comments Memory Protection Execution Prevention • Disabled Some computer viruses and worms cause memory buffers to overflow by running code where only data is allowed. If the Data Execution Prevention feature can be used with your operating system, then by selecting Enabled you can protect your computer against attacks by such viruses and worms.
Table 4. Security menu items (continued) Menu item Submenu item Selection Comments I/O Port Access Ethernet LAN • Disabled If you select Enabled, you can use the Ethernet LAN device. • Enabled Wireless LAN • Disabled If you select Enabled, you can use wireless LAN devices. • Enabled Bluetooth • Disabled If you select Enabled, you can use Bluetooth devices. • Enabled USB Port • Disabled If you select Enabled, you can use USB connectors.
Table 4. Security menu items (continued) Menu item Submenu item Selection Comments Only and set CSM Support as No. Platform Mode • Setup Mode • User Mode Secure Boot Mode • Standard Mode • Custom Mode Reset to Setup Mode • Yes • No Restore Factory keys • Yes • No Clear All Secure Boot Keys • Yes • No Specify the system operating mode. Specify the system operating mode. This option is used to clear the current platform key and put the system into Setup Mode.
Note: The Boot menu will be displayed if the computer cannot start from any devices or the operating system cannot be found. The following table lists the Startup menu items. Default values are in boldface. Note: Some items are displayed on the menu only if the computer supports the corresponding features. Table 5. Startup menu items Menu item Selection Comments Boot Select the boot device when you press the power button to turn on the computer.
Table 5. Startup menu items (continued) Menu item Selection Comments Boot Device List F12 Option • Disabled If you select Enabled, the F12 key is recognized and the Boot Menu window is displayed. • Enabled Boot Order Lock • Disabled • Enabled If you select Disabled, your computer will boot using the default priority. If you select Enabled, your computer will boot using the priority you have customized.
Chapter 6. Preventing problems An important part of owning a ThinkPad notebook computer is maintenance. With proper care, you can avoid common problems. The chapter provides information that can help you keep your computer running smoothly.
• For suspected hard disk drive, hybrid drive, or solid-state drive issues, refer to “Diagnosing problems” on page 75 and run a diagnostic test for the drive before you call the Customer Support Center. If your computer does not start up, download the files to create a bootable self-test medium from http://www.lenovo.com/hddtest. Run the test and record any messages or error codes.
Taking care of your computer Although your computer is designed to function reliably in normal work environments, you need to use common sense in handling it. By following the important tips in this topic, you will get the most use and enjoyment out of your computer. Be careful about where and how you work • Store packing materials safely out of the reach of children to prevent the risk of suffocation from plastic bags.
• Before you install any of the following devices, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. The static electricity could damage the device. Note: Not all listed devices are included in your computer. – Memory module – Mini-PCI card – Memory card, such as an SD card, SDHC card, SDXC card, and a MultiMediaCard This action reduces any static electricity from your body. The static electricity could damage the device.
8. Wipe the surface again with a dry, soft, lint-free cloth. 9. Wait for the surface to dry completely and remove any fibers from the cloth. Cleaning your computer keyboard To clean the computer keyboard, do the following: 1. Apply some isopropyl rubbing alcohol to a soft, dust-free cloth. Note: Avoid spraying cleaner directly onto the keyboard. 2. Wipe each keytop surface with the cloth.
74 User Guide
Chapter 7. Troubleshooting computer problems This chapter provides information on what to do if you experience a problem with your computer. • “Diagnosing problems” on page 75 • “Troubleshooting” on page 75 Diagnosing problems If you experience problems with your computer, use the Lenovo Solution Center program as a starting point for solving them. The Lenovo Solution Center program enables you to troubleshoot and resolve computer problems.
1. Press and hold the power button either your computer or the connected ThinkPad OneLink Dock or ThinkPad OneLink Pro Dock (hereinafter called the dock) until the computer turns off. After the computer is turned off, restart by pressing the power button. If the computer does not turn on, continue with step 2. Note: Do not remove the battery connector and the ac power adapter or the battery connector and the dock to reset the computer. 2.
Solution: Checksum of the supervisor password in the EEPROM is not correct. The system board should be replaced. Have the computer serviced. • Message: 0183: Bad CRC of Security Settings in EFI Variable. Enter ThinkPad Setup. Solution: Checksum of the Security settings in the EFI Variable is not correct. Enter ThinkPad Setup to check security settings, Press F10 and then press Enter to restart the system. If you still have a problem, have the computer serviced. • Message: 0187: EAIA data access error.
Solution: ThinkVantage Active Protection sensor is not working correctly. Have the computer serviced. • Message: 2100: Detection error on HDD0 (Main HDD). Solution: The hard disk drive or hybrid drive is not working. Have the hard disk drive or hybrid drive serviced. • Message: 2101: Detection error on HDD1 (Ultrabay HDD)). Solution: The hard disk drive or hybrid drive is not working. Have the hard disk drive or hybrid drive serviced. • Message: 2102: Detection error on HDD2 (Mini SATA).
Errors without messages • Problem: My screen keeps blanking when I do not want it to. Solution: If you computer is preinstalled with the Windows 7 operating system, you can disable any system timers, such as the LCD turn-off timer or the blank timer by doing the following: 1. Start Power Manager. 2. Click the Power plan tab, and then select Maximum Performance from the predefined power plans.
Table 6. Beep errors (continued) Three short beeps, pause, one short beep, pause, one more short beep, and three short beeps PCI resource allocation failure. Power off the computer and remove the device from the ExpressCard Slot. If the beeps persist, have the computer serviced. Five short beeps, pause, Five short beeps, pause The Security Chip has a problem. Have the computer serviced. Four cycles of four short beeps The Security Chip has a problem. Have the computer serviced.
– The switch port and the adapter have the same duplex setting. If you configured the adapter for full duplex, make sure that the switch port also is configured for full duplex. Setting wrong duplex mode can degrade performance, cause data loss, or result in lost connections. – You have installed all networking software that is necessary for your network environment. Check with your LAN administrator for the necessary networking software. • Problem: The adapter stops working for no apparent reason.
• Problem: Sound does not come from the Bluetooth headset/headphone but comes from the local speaker even though the Bluetooth headset/headphone is connected using a Headset profile or AV profile. Solution: Do the following: 1. Exit the application that uses the sound device (for example, Windows Media Player). 2. Go to Control Panel and click Hardware and Sound ➙ Sound ➙ Playback. 3. If you are using a Headset profile, select Bluetooth Hands-free Audio and click the Set Default button.
3. Select the Hardware tab. In the Device Properties pane, make sure that you see this message: Device Status: This device is working properly. If keys on the keyboard still do not work, have the computer serviced. • Problem: A number is displayed when you type a letter. Solution: The numeric lock function is on. To disable it, press Fn+NumLock. • Problem: All or some keys on the external numeric keypad do not work. Solution: Make sure that the external numeric keypad is correctly connected to the computer.
5. Click Browse my computer for driver software, and then click Let me pick from a list of device drivers on my computer. 6. Clear the Show compatible hardware check box. 7. Select the correct manufacturer and model for the external monitor. If you cannot find your monitor on the list, stop the installation of this driver and use the driver shipped with your monitor. 8. After updating the driver, click Close. 9.
6. Click OK. If the information is incorrect, reinstall the device driver. – Check the monitor type and, if necessary, update the driver by doing the following: 1. Connect the external monitor to the monitor connector, and then connect the monitor to an electrical outlet. 2. Turn on the external monitor and the computer. 3. Right-click on the desktop, and click Screen resolution. Note: If your computer cannot detect the external monitor, click the Detect button. 4.
• Problem: Wrong characters are displayed on the screen. Solution: Did you follow the correct procedure when installing the operating system or program? If you did, have the external monitor serviced. • Problem: The Extend desktop function does not work. Solution: Enable the Extend desktop function by doing the following: 1. Connect the external monitor to the monitor connector, and then connect the monitor to an electrical outlet. 2. Turn on the external monitor and the computer. 3.
3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. 4. Double-click Sound, video and game controllers. 5. Make sure that the following device is enabled and configured correctly: – Conexant CX20672 SmartAudio HD • Problem: Recordings made using the microphone input are not loud enough. Solution: Make sure that the Microphone Boost function is turned on and set by doing the following: 1. Open Control Panel. 2.
4. Look at the playback devices. If you have attached a headphone, the headphone will be automatically set as the default device, and the icon for that headphone will be checked. 5. To set a different device as the default, double-click the icon for those speakers. That icon will now have a check mark. 6. Play any sound by use of a music program such as Windows Media Player. Make sure that sound comes from the speakers. For details, refer to the help information system for SmartAudio.
An ac power adapter problem Problem: The ac power adapter is connected to the computer and the working electrical outlet, but the power adapter (power plug) icon is not displayed in the Windows notification area. Solution: Do the following: 1. Make sure that the connection of the ac power adapter is correct. For instructions on connecting the ac power adapter, see Safety, Warranty, and Setup Guide that comes with your computer. 2.
Boot problems Print these instructions now and keep them with your computer for reference later. If you receive an error message before the operating system loads, follow the appropriate corrective actions for POST error messages. If you receive an error message while the operating system is loading the desktop configuration after the POST is completed, check the following items: 1. Go to the Lenovo Support Web site at http://www.lenovo.com/support and search for the error message. 2.
• Problem: Your computer does not enter sleep or hibernation mode. Solution: Check whether any option has been selected to disable your computer from entering sleep or hibernation mode. If your computer tries to enter sleep mode but the request is rejected, the device attached to the USB connector might have been disabled. If this occurs, do a hot-unplug-and-plug operation for the USB device. • Problem: The battery discharges slightly while the computer is in hibernation mode.
• Other applications run correctly on your computer. • The necessary device drivers are installed. • The application works when it is run on some other computer. If an error message is displayed while you are using the application, refer to the manuals supplied with the application. If the application still does not run correctly, contact your place of purchase or a service representative for help. Problems with ports and connectors The following are the most common problems with ports and connectors.
Chapter 8. Recovery overview This chapter provides information about the recovery solutions provided by Lenovo. • “Recovery overview for the Windows 7 operating system” on page 93 • “Recovery overview for the Windows 8.1 operating systems” on page 98 Recovery overview for the Windows 7 operating system This section provides information about the recovery solutions provided by Lenovo on the Windows 7 operating system.
To create recovery media, click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ Factory Recovery Disks. Then, follow the instructions on the screen. Using recovery media This section provides instructions on how to use recovery media on different operating systems. • You can use recovery media to restore the computer to the factory default settings only. You can use recovery media to put the computer in an operational state after all other methods of recovery have failed.
3. Click Back up your hard drive and select backup operation options. Then, follow the instructions on the screen to complete the backup operation. Performing a recovery operation This section provides instructions on how to perform a recovery operation using the Rescue and Recovery program. 1. From the Windows desktop, click Start ➙ All Programs ➙ Lenovo ThinkVantage Tools ➙ Enhanced Backup and Restore. The Rescue and Recovery program opens. 2.
3. If you have set a Rescue and Recovery password, type your password when prompted. The Rescue and Recovery workspace opens after a short delay. Note: If the Rescue and Recovery workspace fails to open, see “Solving recovery problems” on page 98. 4. Do one of the following: • To rescue files from your hard disk drive, hybrid drive, or solid-state drive or from a backup, click Rescue files and follow the instructions on the screen.
3. In the Boot Menu window, select the desired external optical drive as the first boot device. Then, insert the rescue disc into the external optical drive and press Enter. The rescue medium starts. • If you have created a rescue medium using a USB hard disk drive, use the following instructions to use the rescue medium: 1. Attach the USB hard disk drive to one of the USB connectors on your computer. 2. Repeatedly press and release the F12 key when turning on the computer.
Attention: If you need updated device drivers for your computer, do not download them from the Windows Update Web site. Obtain them from Lenovo. For more information, see “Making sure device drivers are current” on page 70. Solving recovery problems If you are unable to access the Rescue and Recovery workspace or the Windows environment, do one of the following: • Use a rescue medium to start the Rescue and Recovery workspace. See “Creating and using a rescue medium” on page 96.
Resetting your computer to the factory default settings If you want to recycle your computer or just start over, you can reset your computer to the factory default settings. Resetting the computer will reinstall the operating system, reinstall all the programs that came with your computer, and reset all the settings to the factory default settings. Attention: If you reset the computer to the factory default settings, all your personal files and settings will be deleted.
Creating recovery media To create recovery media, you need a USB drive with at least 8 GB of storage. The required USB capacity depends on the size of the recovery image. Attention: Creating recovery media will delete anything stored on the USB drive. To avoid data loss, make a backup copy of all the data that you want to keep. To create recovery media, do the following: Note: Ensure that your computer is connected to ac power. 1.
Chapter 9. Replacing devices This chapter provides instructions on how to install or replace hardware for your computer.
• Do not drop, crush, or puncture the battery, or make it subject to strong forces. Battery abuse or mishandling can cause the battery to overheat, which can cause gasses or flame to “vent” from the battery or coin-cell battery. To replace the coin-cell battery, do the following: 1. Turn off the computer; then disconnect the ac power adapter and all cables from the computer. Wait several minutes to let the computer cool. 2. Close the computer display and turn the computer over. 3.
5. Detach the connector 1 . Then remove the coin-cell battery 2 . 6. Install the coin-cell battery 1 . Then attach the connector 2 . 7. Connect the main battery cable. Chapter 9.
8. Attach the cover 1 and pivot it downwards 2 . Then tighten the screws 3 . 9. Turn the computer over again. Connect the ac power adapter and all cables. Replacing the storage drive Before you start, print these instructions and read “Important safety information” on page vi. Attention: The hard disk drive, hybrid drive, or solid-state drive is very sensitive. Incorrect handling can cause damage and permanent loss of data.
3. Loosen the screws 1 and then remove the cover 2 . 4. Disconnect the battery connector. Chapter 9.
5. Remove the screws that secure the hard disk drive, hybrid drive, or solid-state drive. 6. Lift the tab and remove the hard disk drive, hybrid drive, or solid-state drive. 7. Insert the hard disk drive, hybrid drive, or solid-state drive into the slot 1 and position the hard disk drive, hybrid drive, or solid-state drive firmly into place 2 .
8. Install the screws to secure the hard disk drive, hybrid drive, or solid-state drive. 9. Connect the battery cable. Chapter 9.
10. Attach the cover 1 and pivot it downwards 2 . Then tighten the screws 3 . 11. Turn the computer over. Connect the ac power adapter and all cables. Replacing the memory module Before you start, print these instructions and read “Important safety information” on page vi. Increasing memory capacity is an effective way to make programs run faster. Note: The operating speed of the memory module has dependency on the system configuration.
3. Loosen the screws 1 and then remove the cover 2 . 4. Disconnect the battery connector. Chapter 9.
5. Open the latches on both sides of the memory slot at the same time 1 and then remove the memory module 2 . 6. Place the notched end of the new memory module toward the contact edge side of the memory slot, and insert the memory module 1 into the slot at an angle of about 20 degrees. Pivot the memory module downward until it snaps into place 2 . Ensure that the memory module is firmly installed in the slot and cannot be moved easily. Attention: Do not touch the contact edge of the memory module.
7. Connect the battery cable. 8. Attach the cover 1 and pivot it downwards 2 . Then tighten the screws 3 . 9. Turn the computer over. Connect the ac power adapter and all cables. Replacing a wireless LAN card Before you start, print these instructions and read “Important safety information” on page vi. Attention: Before you start installing a wireless LAN card, touch a metal table or a grounded metal object. This action reduces any static electricity from your body.
3. Loosen the screws 1 and then remove the cover 2 . 4. Disconnect the battery connector.
5. If a tool is provided with the new card to help you disconnect cables, use the tool to disconnect the cables from the old card. If no such a tool is provided, hold the cable connector with your fingers and gently disconnect each cable from the old card. 6. Remove the screw 1 . The card pops up. Then remove the card 2 . Chapter 9.
7. Align the contact edge of the new card with the corresponding socket 1 . Pivot the new card downward and then install the screw to secure the new card 2 . 8. Connect the antenna cables to the new card as shown. 9. Connect the battery cable.
10. Attach the cover 1 and pivot it downwards 2 . Then tighten the screws 3 . 11. Turn the computer over. Connect the ac power adapter and all cables. Replacing the keyboard Before you start, print these instructions and read “Important safety information” on page vi. Removing the keyboard To remove the keyboard, do the following: 1. Turn off the computer. Then disconnect the ac power adapter and all cables from the computer. Wait several minutes to let the computer cool. 2.
4. Disconnect the battery connector. 5. Remove the screws that secure the keyboard. 6. Push hard in the direction shown to unlatch the keyboard.
7. Pivot the keyboard slightly upward 1 until you can see the connectors on the bottom side of the keyboard. Then turn over the keyboard as shown 2 . 8. Gently put the keyboard on the palm rest and detach the connectors. Then remove the keyboard. Installing the keyboard To install the keyboard, do the following: Chapter 9.
1. Attach the connectors and then turn over the keyboard. 2. Insert the keyboard into the space under the keyboard-bezel frame as shown. Ensure that the edge of the keyboard is under the keyboard-bezel frame as shown.
3. Slide the keyboard in the direction shown by the arrows. 4. Install the screws to secure the keyboard. 5. Connect the battery cable. Chapter 9.
6. Attach the cover 1 and pivot it downwards 2 . Then tighten the screws 3 . 7. Turn the computer over. Connect the ac power adapter and all cables.
Chapter 10. Getting support This chapter provides information about getting help and support from Lenovo. • “Before you contact Lenovo” on page 121 • “Getting help and service” on page 121 • “Purchasing additional services” on page 123 Before you contact Lenovo Often, you can solve your computer problems by referring to the information in the explanations of error codes, running diagnostic programs, or by consulting the Lenovo Web site. Registering your computer Register your computer with Lenovo.
Information about your computer and preinstalled software, if any, is available in the documentation that comes with your computer. The documentation includes printed books, online books, readme files, and help files. In addition, information about Lenovo products is available on the World Wide Web. Microsoft Service Packs are the latest software source for Windows product updates. They are available through Web download (connection charges might apply) or through disc.
• Replacement or use of parts not manufactured for or by Lenovo or nonwarranted parts • • • • • Note: All warranted parts contain a 7-character or 10-character identification in the format FRU XXXXXXX or FRU XXXXXXXXXX.
124 User Guide
Chapter 11. You and your computer This chapter provides information about accessibility, comfort, and travelling with your computer. Accessibility and comfort Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer.
Head position: Keep your head and neck in a comfortable and neutral (vertical, or upright) position. Chair: Use a chair that gives you good back support and seat height adjustment. Use chair adjustments to best suit your desired posture. Arm and hand position: Keep your forearms, wrists, and hands in a relaxed and neutral (horizontal) position. Type with a soft touch without pounding the keys. Leg position: Keep your thighs parallel to the floor and your feet flat on the floor or on a footrest.
On-screen notification On-screen notification helps hearing-impaired people be aware of the status of their computer. On-screen notification replaces sounds with visual cues or text captions to indicate that activity is happening on the computer. As a result, system alerts are noticeable even when they are not heard. For example, when you select one object with your keyboard, the object is highlighted. When you move the pointer to one object with your mouse, the introductory text of the object is displayed.
• For Windows 8.1: Click the Search icon on the top-right corner of the Start screen and then type Speech Recognition into the displayed search box. If you are using a keyboard, you can just start typing on the Start screen and then the search box and search results are displayed automatically. In the list of results, click Speech Recognition. For more information about how to use and configure Speech Recognition, see the Windows Help and Support information system.
For alternatives on increasing the size of text and other objects, see the following: • “Customizable text size” on page 128 • “Magnifier” on page 128 • “Zoom” on page 128 Ease of Access keyboard shortcuts Keyboard shortcuts are combinations of two or more keys that you can use to perform a task that would typically require a mouse or other pointing devices.
Industry-standard connectors Your computer provides industry-standard connectors that enable you to connect assistive devices, if needed. For more information on the location and function of each connector, see “Locating computer controls, connectors, and indicators” on page 1. Smart latches The smart latches on some ThinkPad notebook computer lid and the removable battery enable you to open your computer lid and remove the removable battery using only one hand with physical strength of less than 22.2 N.
• A quality carrying case that provides adequate cushion and protection • External storage device If you are traveling to another country, you might also want to consider the following items: • An ac power adapter for the country to which you are travelling • An adapter to connect to a phone line in that country (for models equipped with a modem) To purchase travel accessories, go to http://www.lenovo.com/essentials. Chapter 11.
132 User Guide
Appendix A. Regulatory information Wireless related information Wireless interoperability Wireless LAN Card is designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS), Complementary Code Keying (CCK), and/or Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to: • The 802.11b/g Standard, 802.11a/b/g, 802.11n, or 802.
• Immediate Alert Profile • Battery Status Profile Usage environment and your health Integrated wireless cards emit radio frequency electromagnetic energy like other radio devices. However, the level of energy emitted is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.
If your computer is shipped without the Regulatory Notice, you can find it on the Web site at: http://www.lenovo.com/UserManual Export classification notice This product is subject to the United States Export Administration Regulations (EAR) and has an Export Classification Control Number (ECCN) of 4A994.b. It can be re-exported except to any of the embargoed countries in the EAR E1 country list.
European Union - Compliance to the Electromagnetic Compatibility Directive This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility. Lenovo cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the installation of option cards from other manufacturers.
Korea Class B compliance statement Japan VCCI Class B compliance statement Japan compliance statement for products which connect to the power mains with rated current less than or equal to 20 A per phase Lenovo product service information for Taiwan Eurasian compliance mark Brazil regulatory notice Ouvir sons com mais de 85 decibéis por longos períodos pode provocar danos ao sistema auditivo.
138 User Guide
Appendix B. WEEE and recycling statements Lenovo encourages owners of information technology equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. Information on product recycling offerings can be found on Lenovo's Internet site at http://www.lenovo.com/social_responsibility/us/en/.
Disposing of Lenovo computer components Some Lenovo computer products sold in Japan may have components that contain heavy metals or other environmental sensitive substances. To properly dispose of disused components, such as a printed circuit board or drive, use the methods described above for collecting and recycling a disused computer or monitor.
Notice: This mark applies only to countries within the European Union (EU). Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC concerning batteries and accumulators and waste batteries and accumulators. The Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union.
142 User Guide
Appendix C. Restriction of Hazardous Substances Directive (RoHS) European Union RoHS Lenovo products sold in the European Union, on or after 3 January 2013 meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2”). For more information about Lenovo progress on RoHS, go to: http://www.lenovo.com/social_responsibility/us/en/RoHS_Communication.
China RoHS India RoHS RoHS compliant as per E-Waste (Management & Handling) Rules, 2011.
Turkish RoHS The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (EEE). Ukraine RoHS Appendix C.
146 User Guide
Appendix D. ENERGY STAR model information ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy aimed at saving money and protecting the environment through energy efficient products and practices. Lenovo is proud to offer our customers products with the ENERGY STAR qualified designation.
To awaken the computer from sleep mode, press the Fn key on your keyboard. For more information about these settings, see the Windows Help and Support information on the computer. The Wake on LAN function is enabled when your Lenovo computer is shipped from the factory, and the setting remains valid even when the computer is in sleep mode.
Appendix E. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo Access Connections Active Protection System Secure Data Disposal ThinkPad ThinkPad logo ThinkVantage TrackPoint UltraConnect Intel and Intel SpeedStep are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft, Windows, Direct3D, and BitLocker are trademarks of the Microsoft group of companies.
