User Guide
Table Of Contents
- Generic Nios II Booting Methods User Guide
- Overview
- Prerequisites
- Acronym
- Nios II Processor Boot Copier
- Nios II Processor Booting Methods
- Nios II Booting General Flow
- Summary of Nios II Processor Vector Configurations and BSP Settings
- Nios II Processor Application Execute-In-Place from CFI Flash
- Nios II Processor Application Copied from CFI Flash to RAM Using Boot Copier
- Nios II Processor Application Copied from EPCS Flash to RAM Using Boot Copier
- Nios II Booting Elements
- Nios II Programming Solutions
- Document Revision History for Generic Nios II Booting Methods
• Nios II Flash Programmer User Guide
• AN370: Using the Serial Flash Loader with the Quartus Prime Soware
• Parallel Flash Loader IP Core User Guide
Formerly, AN386: Using the Parallel Flash Loader with the Quartus Prime Soware
Recommended Programming Solution
Altera is moving forward with the Quartus Prime programming solution for all Nios II system program‐
ming because there is no enhancement made on Nios II Flash Programmer to support new Altera devices.
Based on the table in the "Nios II Programming Solutions" chapter, the Quartus Prime programmer is able
to support all range of booting ash memories. It is recommended to use the Quartus Prime programming
solution for all Nios II system programming.
Related Information
Nios II Programming Solutions on page 13
14
Recommended Programming Solution
UG-20001
2016.05.24
Altera Corporation
Generic Nios II Booting Methods User Guide
Send Feedback