ITP700 Debug Port Design Guide

R
94 ITP700 Debug Port Design Guide
*
* PINS:
* GNDREF = GROUND
* DRV = DRIVE FROM TWO VCX OUTPUTS
* M2 = MINITEK* CONNECTOR AT TARGET
*
* ADDITIONAL REQUIRED SUBCIRCUIT INCLUDED IN PACKAGES.TXT:
* MINITEK* = ITP DPA HEADER MODEL
*
* ADDITIONAL MODELS THAT MAY BE ADDED:
* VCX16374 = TOSHIBA* VCX BUFFER/DRIVER
*
***************************************************
.SUBCKT TMSDR GNDREF DRV M2
* Load elements
L1 DRV M1 100Nh
C3 M1 GNDREF 100Pf
* Setup Minitek* connector nodes
* Minitek* pad capacitance
CMT1 M1 GNDREF 5.00E-13
CMT2 M2 GNDREF 5.00E-13
* Tie all other Minitek* Model Pins to Ground
RMT2 M3 GNDREF 250
RMT3 M4 GNDREF 250
RMT4 M5 GNDREF 250
RMT5 M6 GNDREF 250
RMT6 M7 GNDREF 250
RMT7 M8 GNDREF 250