Intel Pentium M Processor on 90nm Process with 2-MB L2 Cache Datasheet

Datasheet 25

Electrical Specifications

NOTES:

1. The typical values shown are the VID encoded voltages. Static and ripple tolerances (for minimum and

maximum voltages) are defined in the load line tables, Ta ble 3-8 through Table 3-21. Adherence to loadline

specifications for the Pentium M processor is required to ensure reliable processor operation.

2. The voltage specifications are assumed to be measured at a via on the motherboard’s opposite side of the

processor’s socket (or BGA) ball with a 100-MHz bandwidth oscilloscope, 1.5-pF maximum probe

capacitance, and 1-M minimum impedance. The maximum length of ground wire on the probe should be

less than 5 mm. Ensure external noise from the system is not coupled in the scope probe.

CCD738

Pentium M Processor,

Low Voltage,

738 Core VCC for

Enhanced Intel

SpeedStep Technology

Operating Points:

V1, 2

1.4 GHz 1.116

1.3 GHz 1.116

1.2 GHz 1.100

1.1 GHz 1.068

1.0 GHz 1.052

900 GHz 1.036

800 MHz 1.020

600 MHz 0.988

Table 3-5. Voltage and Current Specifications - Low Voltage Processors (Sheet 2 of 2)

Symbol Parameter Min Typ Max Unit Note