Datasheet

TERMINOLOGY
8
Additional terms referred to in this and other related documentation:
• SC330.1 — An enhanced electrical and mechanical interface based on the SC330 (formerly Slot2) interface that
defines additional signals and electrical requirements to support an OCVR (On Cartridge Voltage Regulator), a
processor core and a System Bus frequency of 100 MHz for 4-way designs. Refer to Chapter 10 for details.
• Retention mechanism — A mechanical component designed to hold the processor in a SC330 connector.
2.2 State of Data
The data contained within this document is subject to change. It is the best information that Intel® is able to provide by the
publication date of this document.
2.3 References
The reader of this specification should also be familiar with material and concepts presented in the following documents:
• CPU-ID Instruction Application Note (Order Number 241618)
• Pentium® III Xeon™ Processor at 700 MHz and 900 MHz Signal Integrity Models, IBIS Format
(www.developer.intel.com
)
• Intel® Pentium® III Xeon™ Processor Specification Update (Order Number 244460)
• S330 Processor Enabling Technology Vendor List (www.developer.intel.com)
• Intel Architecture Software Developer's Manual (Order Number 243193)
Volume I: Basic Architecture (Order Number 243190)
Volume II: Instruction Set Reference (Order Number 243191)
Volume III: System Programming Guide (Order Number 243192)
• 330-Contact Slot Connector (SC330) Design Guidelines
(http://developer.intel.com/design/pentiumii/xeon/designgd/index.htm)
• VRM 8.3 Specification
(http://developer.intel.com/design/pentiumii/xeon/designgd/index.htm)
• Pentium® II Xeon™ processor/Intel® 450NX PCIset AGTL+ Layout Guidelines (Order Number 243790)