Setup Guide

5. USB-C connector (USB 3.1
Gen 2)
• Charge your computer.
• Charge USB-C compatible devices with the output voltage of 5 V and output
current of 3 A.
• Transfer data at USB 3.1 speed, up to 10 Gbps.
• Connect to an external display:
– USB-C to VGA: 1900 x 1200 pixels, 60 Hz
– USB-C to DP: 3840 x 2160 pixels, 60 Hz
• Connect to USB-C accessories to help expand your computer functionality. To
purchase USB-C accessories, go to
https://www.lenovo.com/accessories.
Note: When the battery power is below 10%, the connected USB-C accessories
might not work correctly.
6. Combo audio jack Connect
headphones or headsets with a 3.5-mm (0.14-inch), 4-pole plug.
Note: This jack does not support standalone external microphones. If you use
headsets, choose one with a single plug.
7. Novo button hole Press
the Novo button to open the Novo Button menu. From the menu, you can
choose to open the UEFI/BIOS setup utility, the Boot menu, or the Windows
startup options screen.
8. Storage drive status indicator The
storage drive is being used to read or write data.
When this indicator is blinking, do not put the computer into sleep mode or turn
off the computer.
9. Power indicator Indicate
the system status of the computer.
Connected to ac power:
• Solid white: battery
capacity 80% - 100%
• Blinking slowly in white: battery
capacity 20% - 80%
• Blinking rapidly in amber and off: battery
capacity 1% - 20%
Not connected to ac power:
• Off: battery
capacity 20% - 100%
• Solid amber: battery
capacity 5% - 20%
• Blinking rapidly in amber: battery
capacity 1% - 5%
Chapter 1. Meet your computer 7