Setup Guide

Chapter 3. Explore your computer
Intelligent features
Your computer includes a ToF sensor on top of the screen, which is enabled by default. For this sensor to
detect your presence and head movement, the features Zero Touch Login and Zero Touch Lock must be
enabled in Lenovo Vantage or PC Manager. Based on the detection, the computer may perform operations
automatically to protect your privacy, save battery power, or just make your daily use of the computer easier.
The following table provides a brief introduction to these features.
Your behavior
Computer operation Setup program
Leave the computer Automatically lock the screen and put
the computer in sleep
Pause video playback
Lenovo Vantage or PC Manager
Approach the computer Automatically wake up the computer
Resume video playback
Lenovo Vantage or PC Manager
Use video-conferencing
applications
Blur the background
Lenovo Vantage or PC Manager
Notes:
• Your computer may be pre-installed with either Lenovo Vantage or PC Manager but not both.
• You might need to enable the listed features in the corresponding setup programs and they may not be
enabled by default.
• For video-conferencing applications, Lenovo Vantage provides three modes: blur mode, comic mode, and
sketch mode. The blur mode is disabled by default.
• Face recognition must be set in advance in Lenovo Vantage or PC manager if you want the computer to
automatically wake up when you approach it.
• Not all applications support automatic video pause and resuming. In particular, Web browsers do not
support it.
Customize intelligent features in Lenovo Vantage
You can enable or disable and customize many intelligent features in Lenovo Vantage.
Step 1. Open Lenovo Vantage.
Step 2. Select Hardware Settings ➙ Smart Settings/Smart Assist.
Step 3. Change settings that control the various intelligent features.
Connect to an external display device
You may connect your computer to an external display device through wired or wireless connection.
© Copyright Lenovo 2019 15