Operator's Manual

Safety Information
BIS™ Advance Monitor
17
WARNING: Do not place the battery near any heat source.
WARNING: Do not try to disassemble or short circuit the battery.
WARNING: Only the battery pack provided with this monitor should be used
for the monitor. Use of another battery or a refurbished battery may cause
damage to the monitor or endanger the user. Reference Table 34. BIS™ Advance
Accessories on page 252 regarding the battery pack.
WARNING: The BIS™ Advance monitor contains an internal lithium ion battery.
The battery must be disposed of or recycled based on national and local waste
disposal legislation and requirements. To obtain a new removable battery,
contact [e-mail].
WARNING: Never soak the battery in liquid such as water, drink, or oil.
WARNING: Use, store, and transport the battery only under the designated
temperature conditions. Reference 7.6.4 Battery Specifications on page 231.
WARNING: If the monitor is to be stored for three months or more, store the
battery outside the monitor.
WARNING: If the battery has not been in use for an extended period, charge
the battery before use to a level of at least 80% charge. Battery capacity
indicators are described in 3.3.3 Battery and Power Usage on page 63.
Caution: There should always be a battery installed in the device. If the battery
is not installed, the monitor will operate properly on AC power, but if AC
power is lost for any reason, the monitor will cease to function.
Caution: Replace the removable battery if an on-screen message informs you
that this is required, or if more than seven years have passed since the
production date marked on the battery, whichever comes first. To obtain a
new removable battery, contact [e-mail].
Caution: Check the battery annually by operating a BIS™ Advance monitor that
has been disconnected from the wall socket and that has been charged for 4
hours when the monitor is powered off or 8 hours when the monitor is
functioning. The monitor should function for at least one hour on battery
power only.