Operator's Manual
Table Of Contents
- 1. Introduction
- 1.1. Introduction
- 1.2. Safety Information
- 1.3. Device Description
- 1.4. Intended Purpose
- 1.5. BIS™ Advance Monitor System Indications and Contraindications
- 1.6. Patient Target Groups
- 1.7. Intended Users
- 1.8. Essential Performance
- 1.9. Adverse Events (Residual Risks)
- 1.10. The BIS™ Advance Parameters
- 1.11. Symbols
- 2. The BIS™ Advance Monitor — Equipment and Supplies
- 2.1. The BIS™ Advance System
- 2.2. Parts of the System
- 3. Installation and Preparation for Use
- 3.1. Operating Environment
- 3.2. Power Requirements and Battery Use
- 3.3. Battery Operation
- 3.4. Mounting the Docking Station
- 3.5. Preparing the Docking Station
- 3.6. Preparing the Monitor
- 3.7. Home Screen
- 3.8. Four-Channel Monitoring
- 3.9. Home Screen Trend Graphs
- 3.10. Home Screen Numeric Section
- 3.11. Home Screen Menus
- 3.12. Home Screen Options
- 3.13. Secondary Trend Selection
- 3.14. Home Screen Audio Alarm Settings
- 3.15. Settings and Maintenance
- 3.16. Info Options
- 3.17. Quick Reference Checklist
- 4. Operating the BIS™ Advance Monitoring System
- 4.1. Preparing for Operation
- 4.2. Cases
- 4.3. Alarms and Messages
- 4.4. Chart Data
- 4.5. Menu Map
- 4.6. Institutional Settings
- 5. Data Storage, Transfer, and Export
- 5.1. Cybersecurity and Data Integrity
- 5.2. Monitor Data Memory
- 5.3. BISx Data Memory
- 5.4. Types of Exported Data
- 5.5. Live Case Export
- 5.6. Saved Cases Export
- 5.7. Recording a Snapshot Event
- 5.8. BIS™ Saved Data Files
- 5.9. Logs Export
- 5.10. Viewing and Printing Saved Data in PDF Format
- 6. Service and Maintenance
- 6.1. Introduction
- 6.2. Servicing the BIS™ Advance Monitor
- 6.3. Battery Handling
- 6.4. Cleaning the BIS™ Advance Monitor
- 6.5. Instrument Identification
- 7. Diagnostics and Troubleshooting
- 7.1. Diagnostics
- 7.2. Troubleshooting
- 7.3. Administrator Mode
- 7.4. Demo Mode
- 7.5. Glossary
- 7.6. Specifications
- 7.6.1. General Specifications
- 7.6.2. Operating Environments
- 7.6.3. Power Supply
- 7.6.4. Battery Specifications
- 7.6.5. Controls and Connectors
- 7.6.6. Alarms
- 7.6.7. Display
- 7.6.8. Sound Pressure Data
- 7.6.9. BIS Specifications
- 7.6.10. EEG Specifications
- 7.6.11. BISx Module Specifications
- 7.6.12. Software/GUI Specifications
- 7.7. Electromagnetic Compatibility Specifications
- 7.8. Product Compliance
- 7.9. BIS™ Advance Components, Accessories, and Documentation
- 7.10. Warranty
- 7.11. Software License Agreement
Live Case Export
BIS™ Advance Monitor
189
Download of Live Case data cannot commence unless a USB flash drive is
connected to the monitor or the docking station.
2. Live Case data can be exported during monitoring only, only when a USB
flash drive is connected to the monitor (either directly to the monitor or via
the docking station). Commence monitoring.
3. Click Main Menu>DOWNLOAD. Select Live Case. The left button in the
middle of the screen will display a grey circle. Click this button , so that it
will display a red circle and the word REC in red will appear next to Live
Case at the left side of the window.
4. When Live Case recording is on, and a flash drive is connected to receive
the Live Case recording, the Live Case icon will appear at the top right side
of the home screen (reference 3.10.9 Home Screen Indicators and Messages
on page 114).
5. Live Case data will begin recording onto the USB flash drive. The Live Case
icon at the top right side of the home screen (reference 3.10.9 Home Screen
Indicators and Messages on page 114) will indicate that Live Case recording
is on.
6. Live Case data download will continue until one of the following occurs:
• The monitor is shut down
• The USB flash drive is removed
• Live Case data download is stopped by turning Live
Recording off by clicking the right square in the Live Case
DOWNLOAD window.
• The case ends
• The operator removes and reinserts or switches the sensor or
the BISx module (which will start a new case).
7. If the operator removes and reinserts or switches the sensor or the BISx
module (which will start a new case), Live Recording must be set to ON
again before download can commence.
8. The Live Recording default setting is OFF. Live Recording should be
set to ON as described above before each new case.