User's Manual

INTEL® AERO COMPUTE BOARD
FCC Statement (USA): This equipment has
been tested and found to comply with the
limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:1)
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver. 2) Connect the
equipment to an outlet on a circuit different
from that to which the receiver is connected.
3) Consult the dealer or an experienced radio
or television technician for help. This device
complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Exposure to Radio Frequency Radiation - This
product is defined as a mobile device as “a
transmitting device designed to be used in other
fixed locations and to generally be used in such a
way that a separation distance of at least 20 cm is
normally maintained between the transmitter’s
radiating structure(s) and the body of the user or
nearby persons.” This product is intended to be
installed into a vehicle such that the unit is
physically secured at one location. The
transmitting antenna should be installed so there
is at least 20 cm of separation between the body of
the user and nearby person and the antenna.
This device must not be co-located or operating in
conjunction with any other antenna or transmitter.
FCC requires the user to be notified that any
changes or modifications made to this device that
are not expressly approved by manufacture, may
void the user’s authority to use the device
Canada Notice:
This device complies with Industry Canada license-
exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not
cause interference, and (2) this device must accept
any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR
d’Industrie Ca nad a ap plicab les au x ap par eils ra dio
exempts de licence. L ’exploitati on est au torisée
aux deux conditions suivan tes : ( 1) l’ap pare il ne
doit p as pro duire de bro uillage, et (2) l’utilisate ur
de l’ap pareil doit ac cepter tout brouillage
rad ioélectrique subi, mê me si le brouillag e est
susceptible d’en comp rome ttre le fo nctionneme nt.
Industr y Can ad a IC ES-003 Comp lian ce Label: CA N
ICE S-3 ( *)/N MB -3(*)
Europe (CE Declaration of Conformity): This
product complies with the Low Voltage
Directive 2014/35/EU; EMC Directive
2014/30/EU, EU Directive R&TTE Directive
1999/5/EC, and RoHS Directive 2011/65/EU.
Point of contact: Intel Corporation, Attn:
Corporate Quality, 2200 Mission College Blvd.,
Santa Clara, CA 05054 USA.
"In the EU, this symbol means that this
product must not be disposed of with
household waste. It is your responsibility to
bring it to a designated collection point for the
recycling of waste electrical and electronic
equipment. For more information, please
contact your local waste collection center or
your point of purchase of this product."
LabelingRequirementsfortheHostdevice
Thehostdeviceshallbeproperlylabeledtoidentify
themoduleswithinthehostdevice.Thecertification
labelofthemoduleshallbeclearlyvisibleatalltimes
wheninstalledinthehostdevice,otherwisethehost
devicemustbelabeledtodisplaytheFCCIDandICof
themodule,precededbythewords"Contains
transmittermodule",ortheword"Contains",orsimilar
wordingexpressingthesamemeaning,asfollows:

ContainsFCCID:2AB8ZAERO
ContainsIC:1000X‐AERO
Cet équipement est conforme avec l'exposition
aux r
adiations ISED définies pour un
environnement non contrôlé. Cet équipement doit
être installé et utilisé à une distance minimum de
20 cm entre le radiateur et votre c
orps. Cet
émetteur ne doit pas être co-localisées ou opérant
en conjonction avec une autre antenne ou
transmetteur.
The device for operation in the band 5150–5250 MHz is
only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems.
Le fonctionnement sur la bande 5,15–5,25Ghz est limité à
une utilisation intérieure uniquement.