User's Manual

Set Up the AnyPoint™ Wireless II Network CHAPTER 2
19
• Parental Control for Web site filtering
Configure the ISS connection
To configure the ISS connection:
1
At the ISS server PC, open ISS by double-clicking the ISS icon in the
taskbar.
2 Click Configure. The Internet sharing server screen appears.
3 Click Accept. The changes take effect the next time you connect to the
Internet through ISS.
Important: If you are using a gateway or access point in your
network, do not install ISS. Refer to the documentation for those
devices for instructions on connecting to the Internet.
Note: If you use a DSL service, cable modem, or other continuous
connection, the only setting you can change is the default ISP.
Type the number of minutes of
inactivity you want ISS to wait
before ending the Internet
connection. To disable automatic
hang up, uncheck Automatically
hang up.
To change the
default ISP, select
an account name
from the list.
Type the number
of times you want
ISS to redial
when the line is
busy and the
number of
seconds to wait
between redials.
Select whether Any PC should
be able to hang up the
connection, or whether this
should be allowed from the ISS
Server PC only.