Basic Rail Kit Install Guide for Intel® Server Chassis A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/ Products Intel® Server Chassis SR1500 Intel® Server Chassis SR1550 Intel® Server Chassis SR1600 Intel® Server Chassis SR1625 Intel® Server Chassis SR2400 Intel® Server Chassis SR2500 Intel® Server Chassis SR2600 Intel® Server Chassis SR2625 Intel® Server System SR1560SF Intel Order Number: D59599-003, Rev.
Disclaimer Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document.
Safety Information Important Safety Instructions Read all caution and safety statements in this document before performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the Intel® Server Deployment Toolkit CD and/or at http://support.intel.com/support/ motherboards/server/sb/cs-010770.htm. Wichtige Sicherheitshinweise Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor Sie eine der Anweisungen ausführen.
Safety Information Warnings Heed safety instructions: Before working with your server product, whether you are using this guide or any other resource as a reference, pay close attention to the safety instructions. You must adhere to the assembly instructions in this guide to ensure and maintain compliance with existing product certifications and approvals. Use only the described, regulated components specified in this guide.
Contents Contents Safety Information ..................................................................................................... iii Important Safety Instructions ................................................................................................ iii Wichtige Sicherheitshinweise ............................................................................................... iii Consignes de sécurité ......................................................................................
Contents vi Basic Rail Kit Install Guide for Intel® Server Chassis
List of Figures List of Figures Figure 1. Rail Kit Components ................................................................................................... 2 Figure 2. Removing the Inner Rail from the Rail Assembly........................................................ 3 Figure 3. Installing the Outer Rail Slides to the Rack Posts....................................................... 4 Figure 4. Attaching the Inner Rails to the Server Chassis Sidewalls .........................................
List of Figures viii Basic Rail Kit Install Guide for Intel® Server Chassis
1 Rail Kit Installation Instructions Use the instructions in this installation guide to install the AXXBASRAIL13 rail kit to one of the following Intel® products: • • • • • • • • • Intel® Server Chassis SR1500 Intel® Server Chassis SR1550 Intel® Server Chassis SR1600 Intel® Server Chassis SR1625 Intel® Server Chassis SR2400 Intel® Server Chassis SR2500 Intel® Server Chassis SR2600 Intel® Server Chassis SR2625 Intel® Server System SR1560SF Before You Begin Before installing the rail kit, observe these sa
Rail Kit Installation Instructions Kit Content List (AXXBASRAIL13) Each Rack Mount Kit contains the following: Note: The two included rail assemblies are NOT interchangeable. Each is installed into the rack by its orientation (right or left) when standing in front of the rack. The right rail assembly is identified with a BLUE (RH) sticker and the left rail assembly is identified with a GREEN (LH) sticker. Note: This kit includes two sets of 8-32x1/2” screws.
Rail Kit Installation Instructions Installation Instructions Remove the Inner Rail from the Rail Assembly 1. Extend the inner rail until it locks. See letter “A” in Figure 2. 2. Depress the spring safety lock to release the inner rail. See letter “B” in Figure 2. 3. Remove the inner rail from the rail assembly. See letter “C” in Figure 2. Figure 2.
Rail Kit Installation Instructions Install Outer Rail Slides to Rack Posts 1. Attach the outer rail slides to the rack posts using two #8-32 x 1/2 screws at the front posts, and two #8-32 x 1/2 screws at the rear posts. See letter “A” in Figure 3. Note: The rail flanges mount to the inside of each post. ack fR ro Rea of ont k Rac Fr AF000628 Figure 3.
Rail Kit Installation Instructions Attach Inner Rails to Server Chassis Sidewalls 1. Insert the inner rails over the server chassis sidewall studs. See letter “A” in Figure 4. 2. Slide the inner rails toward the front of the server chassis. See letter “B” in Figure 4. 3. Secure the inner rails with one #6-32 x 1/4 screw for each rail. See letter “C” in Figure 4. Figure 4.
Rail Kit Installation Instructions Install the Server Chassis into the Rack 1. Align the inner rails (attached to the server chassis) with the outer rail assemblies (attached to the rack). See letter “A” in Figure 5. Note: The inner slides must be positioned all the way forward in the rails to ensure proper installation of the server. 2.
Rail Kit Installation Instructions 3. Depress the two safety locks (one on each side). See letter “A” in Figure 6. 4. Slide the server chassis all the way into the rack. See letter “B” in Figure 6. 5. Use the rack screws (#8-32 x 3/4) to secure the chassis and rack handles into the rack. See letter “C” in Figure 6. Figure 6.
Rail Kit Installation Instructions 8 Basic Rail Kit Install Guide for Intel® Server Chassis