Gigabit Ethernet Switch User Guide

Intel® Gigabit Ethernet Switch AXXSW1GB User Guide 107
• Restore Defaults — Restores the QoS Interface factory defaults.
2. Define the relevant fields.
3. Click . Quality of Service is enabled on the device.
To modify the QoS:
1. Click . The Modify Port Priority Page opens:
Figure 76. Modify Port Priority Page
In addition to the fields in the CoS Global Settings Page, the Modify Port Priority Page
contains the following field:
• Set Default User Priority — Sets the default user priority. The possible field values
are 0-7. The default CoS value is 0. With the default settings, 0 is the lowest and 7 is
the highest priority.
2. Modify the relevant fields.
3. Click . The Port Priority settings are saved to interface, and the device
is updated.
Restoring Factory Default QoS Interface Settings
1. Click QoS > General > CoS. The CoS Global Settings Page opens.
2. Check the Restore Defaults checkbox next to the corresponding Interface.
3. Click . The factory defaults are restored on the interface.