Gigabit Ethernet Switch User Guide
Table Of Contents
- Safety Information
- Preface
- 1 Getting Started
- 2 Managing Device Information
- 3 Configuring Device Security
- 4 Configuring Ports
- 5 Aggregating Ports
- 6 Configuring VLANs
- 7 Defining Forwarding Database
- 8 Configuring Multicast Forwarding
- 9 Configuring Spanning Tree
- 10 Configuring Quality of Service
- 11 Managing System Logs
- 12 Managing Device Diagnostics
- 13 Viewing Statistics
- A Troubleshooting
- B Installation/Assembly Safety Instructions
- C Safety Information
- English
- Deutsch
- Français
- Español
Intel® Gigabit Ethernet Switch AXXSW1GB User Guide 137
• Type — Indicates the port mode configuration for port mirroring. The possible field values are:
— Rx Only — Defines the port mirroring on receiving ports.
— Tx Only — Defines the port mirroring on transmitting ports.
— Tx and Rx — Defines the port mirroring on both receiving and transmitting ports. This is the
default value.
• Status — Indicates if the port is currently monitored. The possible field values are:
— Active — Indicates the port is currently monitored.
— Ready — Indicates the port is not currently monitored.