Gigabit Ethernet Switch User Guide
Table Of Contents
- Safety Information
- Preface
- 1 Getting Started
- 2 Managing Device Information
- 3 Configuring Device Security
- 4 Configuring Ports
- 5 Aggregating Ports
- 6 Configuring VLANs
- 7 Defining Forwarding Database
- 8 Configuring Multicast Forwarding
- 9 Configuring Spanning Tree
- 10 Configuring Quality of Service
- 11 Managing System Logs
- 12 Managing Device Diagnostics
- 13 Viewing Statistics
- A Troubleshooting
- B Installation/Assembly Safety Instructions
- C Safety Information
- English
- Deutsch
- Français
- Español
Intel® Gigabit Ethernet Switch AXXSW1GB User Guide 149
Attribute (Counter) Received Transmitted
• Join Empty — Displays the device GVRP Join Empty statistics.
• Empty — Displays the device GVRP Empty statistics.
• Leave Empty — Displays the device GVRP Leave Empty statistics.
• Join In — Displays the device GVRP Join In statistics.
• Leave In — Displays the device GVRP Leave in statistics.
• Leave All — Displays the device GVRP Leave all statistics.
GVRP Error Statistics
• Invalid Protocol ID — Displays the device GVRP Invalid Protocol ID statistics.
• Invalid Attribute Type — Displays the device GVRP Invalid Attribute ID statistics.
• Invalid Attribute Value — Displays the device GVRP Invalid Attribute Value
statistics.
• Invalid Attribute Length — Displays the device GVRP Invalid Attribute Length
statistics.
• Invalid Event — Displays the device GVRP Invalid Event statistics.
2. Select an interface in the Interface field. The GVRP statistics are displayed.
Resetting GVRP Statistics Counters
To reset the GVRP statistics counter:
1. Open the GVRP Statistics Page.
2. Click . The GVRP statistics counters are cleared.