Gigabit Ethernet Switch User Guide
Table Of Contents
- Safety Information
- Preface
- 1 Getting Started
- 2 Managing Device Information
- 3 Configuring Device Security
- 4 Configuring Ports
- 5 Aggregating Ports
- 6 Configuring VLANs
- 7 Defining Forwarding Database
- 8 Configuring Multicast Forwarding
- 9 Configuring Spanning Tree
- 10 Configuring Quality of Service
- 11 Managing System Logs
- 12 Managing Device Diagnostics
- 13 Viewing Statistics
- A Troubleshooting
- B Installation/Assembly Safety Instructions
- C Safety Information
- English
- Deutsch
- Français
- Español
158 Intel® Gigabit Ethernet Switch AXXSW1GB User Guide
• Undersize Packets — Displays the number of undersized packets (less than 64
octets) received on the interface since the device was last refreshed.
• Oversize Packets — Displays the number of oversized packets (over 1518 octets)
received on the interface since the device was last refreshed.
• Fragments — Displays the number of fragments (packets with less than 64 octets,
excluding framing bits, but including FCS octets) received on the interface since the
device was last refreshed.
• Jabbers — Displays the
total number of received packets that were longer than 1518
octets. This number excludes frame bits, but includes FCS octets that had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad
FCS with a non-integral octet (Alignment Error) number. The field range to detect
jabbers is between 20 ms and 150 ms.
• Collisions — Displays the number of collisions received on the interface since the
device was last refreshed.
• Utilization — Displays the percentage of the interface utilized.
2. Select an entry in the History Entry No.field. The Statistics are displayed.