Gigabit Ethernet Switch User Guide
Table Of Contents
- Safety Information
- Preface
- 1 Getting Started
- 2 Managing Device Information
- 3 Configuring Device Security
- 4 Configuring Ports
- 5 Aggregating Ports
- 6 Configuring VLANs
- 7 Defining Forwarding Database
- 8 Configuring Multicast Forwarding
- 9 Configuring Spanning Tree
- 10 Configuring Quality of Service
- 11 Managing System Logs
- 12 Managing Device Diagnostics
- 13 Viewing Statistics
- A Troubleshooting
- B Installation/Assembly Safety Instructions
- C Safety Information
- English
- Deutsch
- Français
- Español
8 Intel® Gigabit Ethernet Switch AXXSW1GB User Guide
Resetting the Device
The Reset Page enables resetting the device from a remote location.
Note: To prevent the current configuration from being lost, save all changes from the running
configuration file to the startup configuration file before resetting the device.
To reset the device:
1. Click System > Reset. The Reset Page opens.
Figure 6. Reset Page
2. Click .
3. The device reboots and a confirmation prompt appears.
4. Click OK. The device is reset, and a prompt for a user name and password is
displayed.
5. Enter a user name and password to reconnect to the Web Interface.
Logging Off the Device
1. Click . The Embedded Web Interface Home Page closes.