Gigabit Ethernet Switch User Guide
Table Of Contents
- Safety Information
- Preface
- 1 Getting Started
- 2 Managing Device Information
- 3 Configuring Device Security
- 4 Configuring Ports
- 5 Aggregating Ports
- 6 Configuring VLANs
- 7 Defining Forwarding Database
- 8 Configuring Multicast Forwarding
- 9 Configuring Spanning Tree
- 10 Configuring Quality of Service
- 11 Managing System Logs
- 12 Managing Device Diagnostics
- 13 Viewing Statistics
- A Troubleshooting
- B Installation/Assembly Safety Instructions
- C Safety Information
- English
- Deutsch
- Français
- Español
Intel® Gigabit Ethernet Switch AXXSW1GB User Guide 63
To Modify a Protocol Based VLAN Group:
1. Click Layer 2 > VLAN > VLAN Groups > Protocol Based Groups. The VLAN
Protocol Groups Page opens.
2. Click . The Protocol-based Groups Settings Page opens:
Figure 48. Protocol-based Groups Settings Page
3. Modify the fields.
4. Click . The protocol based VLAN group is defined, and the device is
updated. au