Gigabit Ethernet Switch User Guide
Table Of Contents
- Safety Information
- Preface
- 1 Getting Started
- 2 Managing Device Information
- 3 Configuring Device Security
- 4 Configuring Ports
- 5 Aggregating Ports
- 6 Configuring VLANs
- 7 Defining Forwarding Database
- 8 Configuring Multicast Forwarding
- 9 Configuring Spanning Tree
- 10 Configuring Quality of Service
- 11 Managing System Logs
- 12 Managing Device Diagnostics
- 13 Viewing Statistics
- A Troubleshooting
- B Installation/Assembly Safety Instructions
- C Safety Information
- English
- Deutsch
- Français
- Español
68 Intel® Gigabit Ethernet Switch AXXSW1GB User Guide
Defining GVRP
GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic
distribution of VLAN membership information among VLAN-aware bridges. GVRP
allows VLAN-aware bridges to automatically learn VLANs to bridge ports mapping,
without having to individually configure each bridge and register VLAN membership.
To define the GVRP parameters on the device:
1. Click Layer 2 > VLAN > GVRP Parameters. The GVRP Parameters Page
opens:
Figure 53. GVRP Parameters Page
The GVRP Parameters Page is divided into Port and LAG parameters. The field
definitions are the same. The GVRP Parameters Page contains the following fields:
• GVRP Global Status — Indicates if GVRP is enabled on the device. The possible
field values are:
— Enable — Enables GVRP on the device.
— Disable — Disables GVRP on the device.
• Ports — Displays the Port GVRP settings.
• LAGs — Displays the LAG GVRP settings.
• Interface — Displays the port or LAG on which GVRP is enabled.