Datasheet

Intel® S5000 Server Board Family Datasheet System BIOS
Revision 1.3
Intel order number D38960-006
93
Table 30. Setup Utility — Setup Utility – Boot Options Screen Display
Setup Item Options Help Text Comments
Boot Timeout
0 - 65535
The number of seconds BIOS will
pause at the end of POST to allow the
user to press the [F2] key for entering
the BIOS Setup Utility.
Valid values are 0-65535. Zero is the
default. A value of 65535 will cause the
system to go to the Boot Manager
menu and wait for user input for every
system boot.
After entering the desired
timeout, press enter to
register that timeout value to
the system. These settings
are in seconds.
Boot Option #x Available boot
devices.
Set system boot order by selecting the
boot option for this position.
Hard Disk Order Set hard disk boot order by selecting
the boot option for this position.
Appears when more than 1
hard disk drive is in the
system.
CDROM Order Set CDROM boot order by selecting
the boot option for this position.
Appears when more than 1
CDROM drive is in the
system.
Floppy Order Set floppy disk boot order by selecting
the boot option for this position.
Appears when more than 1
floppy drive is in the system.
Network Device Order Set network device boot order by
selecting the boot option for this
position. Add-in or onboard network
devices with a PXE option ROM are
two examples of network boot devices.
Appears when more than 1
of these devices is available
in the system.
BEV Device Order Set the Bootstrap Entry Vector (BEV)
device boot order by selecting the boot
option for this position.
BEV devices require their own
proprietary method to load an OS using
a bootable option ROM. BEV devices
are typically found on remote program
load devices.
Appears when more than 1
of these devices is available
in the system.
Boot Option Retry
Enabled/Disabled
This will continually retry NON-EFI
based boot options without waiting for
user input.
3.7.2.6 Boot Manager Screen
The Boot Manager screen displays a list of devices available to boot from, and allows the user
to select a boot device for this boot.
To access this screen from the Main screen, select Boot Options.