Datasheet
9
1 Desktop Board Features
This chapter briefly describes the main features of Intel
®
Desktop Board D925XCV/D925XBC.
Table 1 summarizes the major features of the desktop board.
Table 1. Feature Summary
Form Factor
• ATX (12.00” x 9.60”) Intel Desktop Board D925XCV
• MicroATX (9.60” x 9.60”) Intel Desktop Board D925XBC
Processor
Support for an Intel
®
Pentium
®
4 processor in the LGA775 package with 800 MHz or
533 MHz front side bus
Main Memory
• Four 240-pin, 1.8 V SDRAM Dual Inline Memory Module (DIMM) sockets
• 533/400 MHz single or dual channel DDR2 SDRAM interface
• Designed to support up to 4 GB of system memory
NOTE: System resources (such as PCI and PCI Express*) require physical memory
address locations that reduce available memory addresses above 3 GB. This may
result in less than 4 GB of memory being available to the operating system and
applications. For the latest list of tested memory, refer to the Intel World Wide Web
site at: http://support.intel.com/support/motherboards/desktop/
Chipset
Intel
®
925X Express Chipset consisting of:
• Intel
®
82925X Memory Controller Hub (MCH) with Direct Media Interface
• Intel
®
82801FR I/O Controller Hub (ICH6-R) supporting Intel
®
Matrix Storage
Technology
Audio
• Intel 925X Express Chipset
• Intel
®
high-definition audio codec
Expansion
Capabilities
• Up to four (Intel Desktop Board D925XCV) or two (Intel Desktop Board D925XBC)
PCI bus add-in card connectors (SMBus routed to PCI bus connector 2)
• One PCI Express x16 connector
• Two PCI Express x1 connectors (Intel Desktop Board D925XCV) or one PCI
Express x1 connector (Intel Desktop Board D925XBC)
• Four Serial ATA (SATA) connectors
• Two front panel USB 2.0 headers
• One front panel audio header
• Two IEEE 1394 headers
LAN Subsystem
Marvell* 88E8050 PCI Express Gigabit Ethernet Controller (10/100/1000 Mbit/sec)
with RJ-45 connector
BIOS
• Intel
®
BIOS
• 8 Mbit symmetrical flash memory
• Support for SMBIOS
• Intel
®
Rapid BIOS Boot
• Intel
®
Express BIOS Update
RAID
Intel
®
Matrix Storage Technology for Serial ATA
continued










