Specification Sheet

Intel NUC Kit Features

1.11.4 Wireless Network Module

The Intel Dual Band Wireless-AC 9560 module provides hi-speed wireless connectivity with the

following capabilities:

• Compliant with IEEE 802.11a/b/g/n/ac, 802.11d, 802.11e, 802.11h, 802.11i, 802.11w,

802.11r, 802.11k specifications

• Wi-Fi CERTIFIED* a/b/g/n/ac with wave 2 features, WMM*, WMM-PS*, WPA*, WPA2*, WPS2*

• Maximum bandwidth of 1.73 Gbps

• Dual Mode Bluetooth® 5

• Downlink MU-MIMO

• 2x2: two Transmit and two Receive streams

• 160 MHz channels (2.4 GHz, 5 GHz)

• Seamless roaming between access points

• OS certified with Microsoft Windows* 10; limited feature support for Linux*

• Wi-Fi Direct* encryption and authentication (Microsoft Windows only): WPA2-PSK, AES-CCMP

• Wi-Fi Miracast* as Source, Protected Management Frames

• Security Features

• Authentication: WPA* and WPA2*, 802.1X (EAP-TLS, TTLS, PEAP, EAP-SIM, EAP-AKA

• Authentication protocols: PAP, CHAP, TLS, MS-CHAP*, MS-CHAPv2

• Encryption: 64-bit and 128-bit WEP, TKIP, 128-bit AES-CCMP

For information about

Refer to

Obtaining WLAN software and drivers http://downloadcenter.intel.com

Full Specifications

http://intel.com/wireless

1.12 Hardware Management Subsystem

The board has several hardware management features, including thermal and voltage monitoring.

1.12.1 Hardware Monitoring

The hardware monitoring and fan control subsystem is based on an ITE Tech. IT8987E-VG

embedded controller, which supports the following:

• Processor and system ambient temperature monitoring

• Chassis fan speed monitoring

• Voltage monitoring of CPU IO Vcc (+Vccio), Memory Vcc (V_SM), CPU IN Vcc (+Vccp)

• SMBus interface

1.12.2 Fan Monitoring

Fan monitoring can be implemented using third-party software.

1.12.3 Thermal Solution

Figure 7 shows the location of the thermal solution and processor fan header.