Specification Sheet

Intel NUC Kit Features
41
2.2.4.11 Digital Microphone Array
The digital microphone array consists of dual front facing digital microphones located on either
side of the front panel to minimize acoustic interference. The digital microphone array is
intended to be used with a digital assistant like Microsoft’s Cortana*. Item A in Figure 12 shows
the location of the digital microphone array connector. Table 18 lists the signal names of the
DMIC connector. See Chapter 5 for the physical location of the DMIC array on the Intel NUC Kit
NUC8i[x]BEK and Intel NUC Kit NUC8i[x]BEH chassis.
2.3 BIOS Security Jumper
CAUTION
Do not move a jumper with the power on. Always turn off the power and unplug the power cord
from the computer before changing a jumper setting. Otherwise, the board could be damaged.
Figure 16 shows the location of the BIOS Security Jumper. The 3-pin jumper determines the
BIOS Security program’s mode.
Table 20 describes the jumper settings for the three modes: normal, lockdown, and
configuration.
Figure 16. Location of the BIOS Security Jumper