Specification Sheet

Datasheet, Volume 1 of 2 49
Electrical Specifications
Pmax VCCIN (W)
Pmax Package (W) 297
Notes:
1. Unless otherwise noted, all specifications in this table apply to all processors.
2. N/A
3. I
CCIN_TDC (Thermal Design Current) is the sustained (DC equivalent) current
that the processor is capable of drawing indefinitely and should be used for the
voltage regulator thermal assessment. The voltage regulator is responsible for
monitoring its temperature and asserting the necessary signal to inform the
processor of a thermal excursion.
4. Minimum V
CCIN and maximum ICCIN are specified at the maximum processor
case temperature (T
CASE
). ICCIN_MAX is specified at the relative VCCIN_MAX
point on the VCCIN load line. The processor is capable of drawing ICCIN_MAX
for up to 2 ms.
Table 5-12. Current (ICCIN_MAX and ICCIN_TDC) Specification (Sheet 2 of 2)
TDP (W) 140
Table 5-13. V
CCIN
Static and Transient Tolerance for 1.0LL (Sheet 1 of 2)
I
CCIN
(A) V
CCIN_Max
(V) V
CCIN_Nom
(V) V
CCIN_Min
(V) Notes
0 VID +0.022 VID -0.000 VID -0.022
10 VID +0.012 VID -0.010 VID -0.032
20 VID +0.002 VID -0.020 VID -0.042
30 VID -0.008 VID -0.030 VID -0.052
40 VID -0.018 VID -0.040 VID -0.062
50 VID -0.028 VID -0.050 VID -0.072
60 VID -0.038 VID -0.060 VID -0.082
70 VID -0.048 VID -0.070 VID -0.092
80 VID -0.058 VID -0.080 VID -0.102
90 VID -0.068 VID -0.090 VID -0.112
100 VID -0.078 VID -0.100 VID -0.122
110 VID -0.088 VID -0.110 VID -0.132
120 VID -0.098 VID -0.120 VID -0.142
130 VID -0.108 VID -0.130 VID -0.152
140 VID -0.118 VID -0.140 VID -0.162
150 VID -0.128 VID -0.150 VID -0.172
160 VID -0.138 VID -0.160 VID -0.182
170 VID -0.148 VID -0.170 VID -0.192
180 VID -0.158 VID -0.180 VID -0.202
190 VID -0.168 VID -0.190 VID -0.212
200 VID -0.178 VID -0.200 VID -0.222
210 VID -0.188 VID -0.210 VID -0.232