Specification Sheet

Thermal Management
104 Datasheet, Volume 1 of 2
5.4.1 Thermal Profile for PCG 2015D Processor
Table 5-8. T
CONTROL
Offset Configuration (S-Processor Line - Client)
Segment 8-Core GT2 6-Core GT2 4-Core GT2 2-Core GT2
TDP [W] 95 95 65 35 91 65/62 35 58 54 35
TEMP_TARGET
(T
CONTROL
) [ºC]
14 18 18 6 20 20 6 22 20 16
Notes:
1. Digital Thermal Sensor (DTS) based fan speed control is recommended to achieve optimal thermal performance.
2. Intel recommends full cooling capability at approximately the DTS value of -1, to minimize TCC activation risk.
3. For example, if T
CONTROL
= 20 ºC, Fan acceleration operation will start at 80 ºC (100 ºC - 20 ºC).
Figure 5-2. Thermal Test Vehicle Thermal Profile for PCG 2015D Processor
Notes:
1. Refer to Table 5-9 for discrete points that constitute the thermal profile.
Table 5-9. Thermal Test Vehicle Thermal Profile for PCG 2015D Processor (Sheet 1 of 2)
Power (W) T
CASE_MAX
(C) Power (W) T
CASE_MAX
(C)
0 43.7 46 53.8
2 44.1 48 54.3
4 44.6 50 54.7
6 45.0 52 55.1
8 45.6 54 55.6
10 45.9 56 56.0
12 46.3 58 56.5
14 46.8 60 56.9
16 47.2 62 57.3
18 47.7 64 57.8
20 48.1 66 58.2
22 48.5 68 58.7
24 49.0 70 59.1
26 49.4 72 59.5
28 49.9 74 60.0