Datasheet
Mobile Intel
®
Pentium
®
III Processor in BGA2 and Micro-PGA2 Packages at 1 GHz,
900 MHz, 850 MHz, 800 MHz, 750 MHz, 700 MHz, Low-voltage 750 MHz, Low-voltage 700 MHz,
Low-voltage 600 MHz, Ultra Low-voltage 600 MHz and Ultra Low-voltage 500 MHz
64 Datasheet 283653-002
Table 33. Power Specifications
for Mobile Pentium III Processor With Intel SpeedStep
Technology
Symbol Parameter TDP
Typ
1,3
TDP
Max
2,3
P
SGNT
3,4
P
QS
3,5
P
DSLP
3,6
Unit
Power
500 / 300 MHz & 1.10 / 0.975V
600 / 300 MHz & 1.10 / 0.975V
600 / 300 MHz & 1.15 / 0.975V
600 / 500 MHz & 1.35 / 1.10V
700 / 500 MHz & 1.35 / 1.10V
750 / 500 MHz & 1.35 / 1.10V
700 / 550 MHz & 1.60 / 1.35V
750 / 600 MHz & 1.60 / 1.35V
800 / 650 MHz & 1.60 / 1.35V
850 / 700 MHz & 1.60 / 1.35V
900 / 700 MHz & 1.70 / 1.35V
1GHz / 700 MHz & 1.70 / 1.35V
5.0 / 2.4
6.4 / 2.4
7.0 / 2.4
8.7 / 5.0
10.2 / 5.0
12.4 / 5.0
15.0 / 8.5
15.8 / 8.7
17.0 / 9.5
18.2 / 10.2
23.3 / 11.2
24.8 / 11.2
8.1 / 4.5
9.7 / 4.5
9.7 / 4.5
14.4 / 8.1
16.1 / 8.1
17.2 / 8.1
23.0 / 13.2
24.6 / 14.4
25.9 / 15.1
27.5 / 16.1
30.7 / 16.1
34.0 / 16.1
0.8 / 0.6
0.8 / 0.6
0.7 / 0.6
1.1 / 0.8
1.6 / 0.8
1.6 / 0.8
1.7 / 1.1
1.7 / 1.1
2.7 / 1.6
2.7 / 1.6
2.9 / 1.6
2.9 / 1.6
0.6 / 0.5
0.6 / 0.5
0.5 / 0.5
0.8 / 0.6
1.2 / 0.6
1.2 / 0.6
1.3 / 0.8
1.3 / 0.8
1.9 / 1.2
1.9 / 1.2
2.2 / 1.2
2.2 / 1.2
0.2 / 0.2
0.2 / 0.2
0.3 / 0.2
0.3 / 0.2
0.4 / 0.2
0.4 / 0.2
0.5 / 0.3
0.5 / 0.3
0.75 / 0.4
0.75 / 0.4
0.93 / 0.4
0.93 / 0.4
W
W
W
W
W
W
W
W
W
W
W
W
T
J
Junction temperature is
measured with the on-die
thermal diode
92
7
, 100 92
7
, 100 50 50 35 °C
NOTES:
1. TDP
TYP
(Thermal Design Power) is a recommendation based on the power dissipation of the processor
while executing publicly available software under normal operating conditions at nominal voltages. Not
100% tested.
2. TDP
MAX
is a specification of the total power dissipation of the processor while executing a worst-case
instruction mix under normal operating conditions at nominal voltages. It includes the power dissipated by
all of the components within the processor. Not 100% tested. Specified by design/characterization.
3. Not 100% tested or guaranteed. The power specifications are composed of the current of the processor on
the various voltage planes. These currents are measured and specified at high temperature in Table 9B.
These power specifications are determined by characterization of the processor currents at higher
temperatures.
4. P
SGNT
is Stop Grant and Auto Halt power.
5. P
QS
is Quick Start and Sleep power.
6. P
DSLP
is Deep Sleep power.
7. 1GHz/700 MHz product also available with junction temperature (Tj) of 92°C. S-Spec number on the
package will identify the part.