User Manual
User Guide for NUC10i7FNHN, NUC10i5FNHN, NUC10i3FNHN
3
This guide tells you how to:
•
Install and remove memory
•
Install an M.2 SSD
•
Install a 2.5” drive
•
Install a VESA mount bracket
•
Connect power
•
Install an operating system
•
Install the latest drivers
Open the Chassis
To open the Intel NUC chassis, follow these steps:
1. Unscrew the four corner screws on the bottom cover of the chassis and lift the cover.
Installing and Removing Memory
Intel NUC Kits NUC10i7FNHN, NUC10i5FNHN, and NUC10i3FNHN have two 260-pin DDR4 SO-DIMM
sockets. Be sure to select memory modules that meet these requirements:
1.2V low voltage memory
2666 MHz SO-DIMMs
Non-ECC
Find compatible memory modules in the Intel Product Compatibility Tool
NUC10i7FNHN
NUC10i5FNHN
NUC10i3FNHN
NOTE If you plan to install only one memory module, install it in the lower memory
socket.