Computer Hardware User's Manual

SubCompact Board GENE-8310
Chapter 4 Driver Installation 4-4
Step 4 – Install Realtek AC97 codec Driver
1. Click on the Realtek AC97 codec Driver folder and then
double click on the setup.exe
2. Follow the instructions that the window shows
3. The system will help you install the driver automatically
Note:
Under the Window OS environment, if the CRT connector is
connected to display monitor by the data switch device, the
user need to set the color and resolution from Intel Graphic
utility (VGA driver) instead of setting from the control panel in
case of the wrong display appearance.