Mini-ITX Addendum Version 1.1 To the microATX Motherboard Interface Specification Version 1.2

7
2 Layout
This section describes the mechanical specification of the Mini-ITX form-factor
motherboard. Size, mounting hole placement, connector placement, and component
height constraints are specified. System components such as hard drives, disk drives,
and power supplies are not specified, however it is generally recommended to
consider what would facilitate assembly, as well as not place components such that
they block fan inlets. An example layout is depicted in Figure 1.
Figure 1. Example Mini-ITX Layout
Note: Depicted system is approximately 8L with standard desktop components.