Intel Core2 Duo Desktop Processor, Intel Pentium Processor, and Intel Pentium 4 Processor 6x1 Sequence
Thermal Management Logic and Thermal Monitor Feature
40 Thermal and Mechanical Design Guidelines
sensitivity to noise. Since the DTS is factory set on a per-part basis there is no need
for the health monitor components to be updated at each processor family.
Note: Intel
®
Core
™
2 Duo processor E6000 and E4000 sequences and Intel
®
Pentium
®
Dual
Core processor E2000 sequence do not have an on-die thermal diode. The T
CONTROL
in
the MSR is relevant only to the DTS.
4.2.11 Platform Environmental Control Interface (PECI)
The PECI interface is a proprietary single wire bus between the processor and the
chipset or other health monitoring device. At this time the digital thermal sensor is the
only data being transmitted. For an overview of the PECI interface see PECI Feature
Set Overview. For additional information on the PECI see the Intel
®
Core™2 Duo
Extreme Processor X6800 and Intel
®
Core™2 Duo Desktop Processor E6000 and
E4000 Sequence Datasheet.
The PECI bus is available on pin G5 of the LGA 775 socket. Starting with the Intel
ICH8 IO Controller Hub has integrated a PECI host controller. The PECI interface and
the Manageability Engine, embedded in the Intel 965 Express chipset family, are key
elements to the Intel
®
Quiet System Technology (Intel
®
QST), see Chapter 7 and the
Intel
®
Quiet System Technology Configuration and Tuning Manual.
Intel has worked with many vendors that provide fan speed control devices to provide
PECI host controllers. Consult the local representative for your preferred vendor for
their product plans and availability.
§