Intel Core2 Duo Desktop Processor, Intel Pentium Processor, and Intel Pentium 4 Processor 6x1 Sequence

Case Temperature Reference Metrology
94 Thermal and Mechanical Design Guidelines
11. While still at the microscope, press the wire down about 6 mm [0.125”] from the
thermocouple bead using the tweezers or your finger. Place a piece of Kapton*
tape to hold the wire inside the groove (
Figure 43). Refer to Figure 44 for detailed
bead placement.
Figure 43. Position Bead on the Groove Step
Figure 44. Detailed Thermocouple Bead Placement
TC Wire with Insulation
IHS with Groove
TC Bead
Wire section
into the
groove to
prepare for
final bead
placement
Kapton* tape