Intel Core2 Duo Desktop Processor, Intel Pentium Processor, and Intel Pentium 4 Processor 6x1 Sequence

Case Temperature Reference Metrology
96 Thermal and Mechanical Design Guidelines
14. Using a fine point device, place a small amount of flux on the thermocouple bead.
Be careful not to move the thermocouple bead during this step (
Figure 47). Ensure
the flux remains in the bead area only.
Figure 47. Applying Flux to the Thermocouple Bead
15. Cut two small pieces of solder 1/16 inch (0.065 inch / 1.5 mm) from the roll using
tweezers to hold the solder while cutting with a fine blade(
Figure 48)
Figure 48. Cutting Solder