Note

Application Note 21
7 Ball Usage
Table 7-1 identifies the balls used for the 4 control lines, also referred to as Lcontrol_0 –
Lcontrol_1 and Hcontrol_0 – Hcontrol_1.
Table 7-2 maps the ball of the High and Low Side controls with the signal ball, ground ball and
power ball for each switch pair. The table can be used to generate tests and diagnose test failures.
Table 7-1. Balls Used as Control Signals
Low Side Control (Lcontrol) High Side Control (Hcontrol)
E6 E5
D14 D1
Table 7-2. Ball Groupings/Functions
Low Side Control High Side Control Signal GND VCCP
E6 E5 G16 H27 T27
E6 E5 G17 L30 T28
E6 E5 F15 AE24 T29
E6 E5 G15 H26 T26
E6 E5 G14 H24 T24
E6 E5 F17 H25 T23
E6 E5 E15 AF30 T30
E6 E5 F14 H23 U30
E6 E5 G18 H21 U29
E6 E5 E16 H22 U28
E6 E5 E18 AF29 N23
E6 E5 F18 H19 N24
E6 E5 E13 E28 U27
E6 E5 G13 H20 N25
E6 E5 D17 AF28 N26
E6 E5 D13
E29 N27
E6 E5 E19 D24 N29
E6 E5 G19 E26 N28
E6 E5 E12 AF27 M23
E6 E5 D19 E25 N30
E6 E5 G12
A24 M25
E6 E5 F12 C24 M24
E6 E5 F11 AF26 M27