Specification Update

MOBILE INTEL
®
CELERON
®
PROCESSOR at 466 MHz, 433 MHz, 400 MHz,
366 MHz, 333 MHz, 300 MHz, 266 MHz SPECIFICATION UPDATE
52
SPECIFICATION CLARIFICATIONS
The Specification Clarifications listed in this section apply to the following documents:
• P6 Family of Processors Hardware Developer’s Manual
• Intel
®
Mobile Celeron
®
Processor in Micro-PGA and BGA Package at 466 MHz, 433 MHz, 400 MHz, 366
MHz, 333 MHz, 300 MHz and 266 MHz datasheet
• Intel
®
Celeron
®
Processor Mobile Module: Mobile Module Connector 1 (MMC-1) at 400 MHz, 366 MHz,
333 MHz, 300 MHz, and 266 MHz datasheet
• Intel
®
Celeron
®
Processor Mobile Module: Mobile Module Connector 2 (MMC-2) at 400 MHz, 366 MHz,
333 MHz, 300 MHz, and 266 MHz datasheet
• Intel
®
Mobile Celeron
®
Processor: Mobile Module MMC-1 at 466 MHz and 433 MHz datasheet
• Intel
®
Mobile Celeron
®
Processor: Mobile Module MMC-2 at 466 MHz and 433 MHz datasheet
• Intel Architecture Software Developer’s Manual, Volumes 1, 2 and 3
All Specification Clarifications will be incorporated into a future version of the appropriate Intel Celeron
processor documentation.
H1. Shipping Container Maximum Temperature Rating for BGA1
In the Intel
®
Mobile Celeron
®
Processor in BGA Package at 300 MHz and 266 MHz datasheet, note 1 is added
to Table 3.5 of the datasheets to include the maximum shipping container temperature rating of 65
o
C. The
following is the updated Table 3.5.
Table 3.5. Mobile Celeron
®
Processor Absolute Maximum Ratings
Symbol Parameter Min Max Unit Notes
T
Storage
Storage Temperature –40 85 °C 1
V
CC
(Abs) Supply Voltage with respect to V
SS
–0.5 3.0 V
V
CCP
CMOS Reference Voltage with respect to V
SS
–0.3 3.0 V
V
IN
GTL+ Buffer DC Input Voltage with respect to V
SS
–0.3 V
CC
+ 0.7 V 2
V
IN25
2.5 V Buffer DC Input Voltage with respect to V
SS
–0.3 3.3 V 3
NOTES:
1. The shipping container is only rated for 65° C.
2. Parameter applies to the Low Power GTL+ signal groups only.
3. Parameter applies to CMOS, Open-Drain, APIC and TAP bus signal groups only.
H2. ESD for MMC-1 and MMC-2
In the Intel
®
Mobile Celeron
®
Processor: Mobile Module MMC-1 datasheet and the Intel
®
Mobile Celeron
®
Processor: Mobile Module MMC-2 datasheet, ESD is a nonpowered test of the module for noncatastrophic
failure only. The module is tested at 2 KV and then is inserted in a system for a functional test.