Intel Celeron D Processor 3xx Sequence

28 Datasheet
Electrical Specifications
2.12 V
CC
Overshoot Specification
The Celeron D processor can tolerate short transient overshoot events where V
CC
exceeds the VID
voltage when transitioning from a high to low current load condition. This overshoot cannot exceed
VID + V
OS_MAX
(V
OS_MAX
is the maximum allowable overshoot voltage). The time duration of
the overshoot event must not exceed T
OS_MAX
(T
OS_MAX
is the maximum allowable time duration
above VID). These specifications apply to the processor die voltage as measured across the
VCC_SENSE and VSS_SENSE pins.
Table 2-15. BSEL [1:0] and VID[5:0] DC Specifications
Symbol Parameter Max Unit Notes
1
NOTES:
1. Unless otherwise noted, all specifications in this table apply to all processor frequencies.
R
on
(BSEL) Buffer On Resistance 60 Ω
2
2. These parameters are not tested and are based on design simulations.
R
on
(VID) Buffer On Resistance 60 Ω
2
I
OL
Max Pin Current 8 mA
I
LO
Output Leakage Current 200 µA
3
3. Leakage to V
SS
with pin held at 2.5 V.
V
TOL
Voltage Tolerance 3.3 + 5% V
Table 2-16. BOOTSELECT DC Specifications
Symbol Parameter Min Typ Max Unit Notes
1
NOTES:
1. These parameters are not tested and are based on design simulations.
V
IL
Input Low Voltage — — 0.2 * VCCVID V
V
IH
Input High Voltage 0.8 * VCCVID — — V
Table 2-17. V
CC
Overshoot Specifications
Symbol Parameter Min Typ Max Unit Figure Notes
V
OS_MAX
Magnitude of V
CC
overshoot
above VID
— — 0.050 V 2-3
T
OS_MAX
Time duration of V
CC
overshoot above VID
—— 25µs 2-3