The Intel Processor Diagnostic Tool for Windows* - User Guide

The Intel® Processor Diagnostic Tool - Windows® User Guide R7
Page 24 of 26
Test Library
MMX/SSE Test
Description
This test detects which MMX & SSE, SSE2, SSE3, SSSE3, SSE4 instruction sets
are supported on the processor being tested. If the instruction set is supported
then the test will execute all MMX & SSE instructions for the supported
instruction sets. The test will display which features were detected and thus
tested.
Options
MMXSSE="Enable", MMXSSE="Disable"
Parameters
N/A
Default Settings
MMXSSE="Enable"
Test Library
Integrated Memory Controller Test
Description
The purpose of Integrated Memory Controller (IMC) Test Library is to test
Integrated Memory Controller functionality which is included in Intel® Core i7
and i5 Processor, Intel® Xeon Processor 5500 series and Intel® Xeon Processors
based on Intel® Micro architecture (Nehalem). This library targets the memory
controller speed, memory size, and it performs memory stress test
SubTest
Integrated Memory Controller Test - Speed Subtest
Description
The memory controller speed subtest detects memory controller speed from PCI
Configuration Space and compares it with speed from performance counter in
processor Model Specific Register. This parameter can be used to enable
(execute) or disable (skip) the memory controller speed subtest.
Options
IMCSpeedTest="Enable", IMCSpeedTest="", IMCSpeedTest="Disable"
Parameters
N/A
Default Settings
IMCSpeedTest="Enable"
SubTest
Integrated Memory Controller Test - Memory Size Subtest
Description
The memory size subtest uses the MemorySize parameter located in the global
parameter section in the IPDTconfig.xml configuration file. This parameter can
be used to enable (execute) or disable (skip) the memory size subtest. If the
MemorySize = Enable or ”” (no value), then the memory is in the first bank only
and report it. This is the default value.
Options
MemorySize="3GB", MemorySize="512MB", MemorySize="256KB",
MemorySize="Enable", MemorySize="", MemorySize="Disable"
(values shown as example only)
Parameters
Size GB, MB, KB,
Default Settings
MemorySize="Enable"; MemorySize=""
Test Library
Integrated Memory Controller Test - Memory Stress Subtest
Description
The memory stress subtest reads and writes using sliding zeros, sliding ones
moving inversion algorithms. This subtest uses the MemoryStressTestSize
parameter located in the global parameter section in the IPDTconfig.xml
configuration file. Setting MemoryStressTestSize will determine how much
available free memory is tested during the Stress subtest
Options
MemorySize="Enable", MemorySize="Disable"
Parameters
% of total memory Size or a specific amount of Memory in GB, MB, KB, Byte
Default Settings
MemorySize="Enable"; MemoryStressTestSize="3%"