Datasheet

Intel
®
Itanium
®
Processor 9300 Series and 9500 Series Datasheet 49
Electrical Specifications
2.6.4 Intel
®
Itanium
®
Processor 9500 Series Uncore and Core
Tolerances
2.6.4.1 Uncore Static and Transient Tolerances
Table 2-23 and Figure 2-13 specify static and transient tolerances for the uncore
outputs.
Table 2-23. V
CC
UNCORE
Static and Transient Tolerance for the Intel
®
Itanium
®
Processor
9500 Series
Uncore
Current (A)
Voltage Deviation from VID Setting (V)1,2,3,4
Notes:
1. The V
CC_MIN
and V
CC_MAX
load lines represent static and transient limits.
2. This table is intended to aid in reading discrete points on Figure 2-14.
3. The load lines specify voltage limits at the die measured at the VCCUNCORESENSE and VSSUNCORESENSE
pins. Voltage regulation feedback for voltage regulator circuits must be taken from processor VCC and VSS
pins. Refer to the Ararat II Voltage Regulator Module Design Guide for socket load line guidelines and VR
implementation.
4. V
DC
(max)=VID-R
ll
*I
CC
+15 mV; V
DC
(min)=VID-R
ll
*I
CC
-15 mV; R
ll
=1.25 mOhm.
I
CC_UNCORE
V
CC_Max
V
CC_Typ
V
CC_Min
0 VID + 0.015 VID VID - 0.015
5 VID + 0.00875 VID - 0.00625 VID - 0.02125
10 VID + 0.0025 VID - 0.0125 VID - 0.0275
15 VID - 0.00375 VID - 0.01875 VID - 0.03375
20 VID - 0.01 VID - 0.025 VID - 0.04
25 VID - 0.01625 VID - 0.03125 VID - 0.04625
30 VID - 0.0225 VID - 0.0375 VID - 0.0525
35 VID - 0.02875 VID - 0.04375 VID - 0.05875
40 VID - 0.035 VID - 0.05 VID - 0.065
45 VID - 0.04125 VID - 0.05625 VID - 0.07125
50 VID - 0.0475 VID - 0.0625 VID - 0.0775
55 VID - 0.05375 VID - 0.06875 VID - 0.08375
60 VID - 0.06 VID - 0.075 VID - 0.09
65 VID - 0.06625 VID - 0.08125 VID - 0.09625
70 VID - 0.0725 VID - 0.0875 VID - 0.1025