Datasheet

Electrical Specifications
56 Intel
®
Itanium
®
Processor 9300 Series and 9500 Series Datasheet
Notes:
1. These parameters are based on design characterization and are not tested.
2. With 50Ω termination to VCCIO at the far end.
Table 2-34. Debug Signal Group DC Specifications
Symbol Parameter Min Max Unit Notes
V
IL
Input Low Voltage 0 (VCCIO*0.67) - 0.2 V
V
IH
Input High Voltage (VCCIO*0.67) + 0.2 VCCIO V
V
OH
Output High Voltage VCCIO-0.2 VCCIO V
V
OL
Output Low Voltage 0 0.35 V 1
I
OL
Output Low Current 13 23 mA 1
Notes:
1. With 2 parallel 50Ω termination to VCCIO at the far end.
I
ILeak
Input Leakage Current –1000 200 µA 2
2. With input leakage current measured at the pin with 0V and with 1.1V supplied to the pin. System designers
are advised to check the tolerance of their voltage regulator solutions to ensure Vpin of 1.1 V.
I
OLeak
Output Leakage Current –1000 200 µA
Table 2-35. PIROM Signal Group DC Specifications
Symbol Parameter Min TYP Max Unit Notes
V
IL
Input Low Voltage -0.6 Vcc*0.3 2,1
Notes:
1. V
IL
(min) and V
IH
(max) are reference only and are not tested.
V
IH
Input High Voltage Vcc*0.7 Vcc +0.5 2,1
V
OL2
Output Low Voltage (I
OL
= 2.1 mA)
0.4 2
V
OL1
Output Low Voltage (I
OL
= 0.15 mA)
0.2
2
2. Applicable over recommended operating range T = -40 °C to +88 °C; Vcc = +1.7 V to +3.6 V.
I
ILeak
Input Leakage Current 0.1 3.0 2
I
OLeak
Output Leakage Current 0.05 3.0 2