user manual

Award BIOS Setup
45
Note: To disable security, select PASSWORD SETTING at Main Menu and then you will be
asked to enter password. Do not type anything and just press <Enter>, it will disable
security. Once the security is disabled, the system will boot and you can enter Setup
freely.
APIC Mode:
This item allows you to enable APIC (Advanced Programmable Interrupt
Controller) functionality. APIC is an Intel chip that provides symmetric
multiprocessing (SMP) for its Pentium systems.
The Choice: Enabled, Disabled.
MPS Version Control For OS:
This item allows you to select the version of the Intel multiprocessor
specification supported by the operating system running on this computer.
The Choice: 1.1, 1.4.
OS Select For DRAM > 64MB:
Select the operating system that is running with greater than 64MB of RAM
on the system.
The choice: Non-OS2, OS2.
Report No FDD For WIN95:
Whether report no FDD for Win 95 or not.
The choice: Yes, No.