user manual

Award BIOS Setup

3.9 PnP/PCI Configurations

This section describes configuring the PCI bus system. PCI, or

Personal Computer Interconnect, is a system, which allows I/O devices to

operate at speeds nearing the speed the CPU itself uses when

communicating with its own special components. This section covers some

very technical items and it is strongly recommended that only experienced

users should make any changes to the default settings.

Phoenix - AwardBIOS CMOS Setup Utility

PnP/PCI Configurations

Reset Configuration Data

Resources Controlled By

X IRQ Resources

PCI/VGA Palette Snoop

Disabled

Auto (ESCD)

Press Enter

Disabled

Item Help

_________________________

Menu Level ¾

Default is Disabled. Select

Enabled to reset Extended

System Configuration Data

(ESCD) when you exit Setup if

you have installed a new add-on

and the system reconfiguration

has caused such a serious

conflict that the OS cannot boot

↑↓←→Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults

Reset Configuration Data:

Normally, you leave this field Disabled. Select Enabled to reset Extended

System Configuration Data (ESCD) when you exit Setup if you have

installed a new add-on and the system reconfiguration has caused such a

serious conflict that the operating system cannot boot.

The choice: Enabled, Disabled.