user manual

Award BIOS Setup

Resource controlled by:

The Award Plug and Play BIOS has the capacity to automatically configure

all of the boot and Plug and Play compatible devices. However, this

capability means absolutely nothing unless you are using a Plug and Play

operating system such as Windows

95. If you set this field to “Manual”

choose specific resources by going into each of the sub menu that follows

this field (a sub menu is preceded by a “¾”).

The choice: Auto (ESCD), Manual.

IRQ Resources:

Phoenix - AwardBIOS CMOS Setup Utility

IRQ Resources

IRQ3 assigned to

IRQ4 assigned to

IRQ5 assigned to

IRQ7 assigned to

IRQ8 assigned to

IRQ9 assigned to

IRQ10 assigned to

IRQ11 assigned to

IRQ12 assigned to

IRQ14 assigned to

IRQ15 assigned to

PCI Device

Item Help

____________________________

Menu Level ¾

↑↓→←Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults

IRQs:

When resources are controlled manually, assign each system interrupt a

type, depending on the type of device using the interrupt.

PCI/VGA Palette Snoop:

This item is designed to overcome problems that can be caused by some

nonstandard VGA cards. This board includes a built-in VGA system that

does not require palette snooping so you must leave this item disabled.

The choice: Enabled, Disabled.