Sound 400MHz FSB

2-2 Unpacking checkup

First of all, please follow all necessary steps of section 2.1 to protect CV700A

from electricity discharge. With reference to section 1.3, please check the delivery package

again with following steps:

1. Unpack the CV700A board and keep all packing material, manual

and driver disc etc, do not dispose !

2. Is there any components lose or drops from the board? DO NOT CONTINUE

TO INSTALL THIS BOARD!CONTACT THE DEALER YOU PURCHASED THIS

BOARD FROM, IMMEDIATELY.

3. Is there any visible damage on the board? DO NOT CONTINUE TO INSTALL

THIS BOARD!CONTACT THE DEALER YOU PURCHASED THIS

BOARD FROM, IMMEDIATELY.

4. Check your optional parts (i.e. DDR2, CF etc.), all necessary jumpers

setting to jumper pin-set, and CMOS setup correctly.

Please also refer to all information of jumper settings in this manual.

5. Check your external devices (i.e. Add-On-Card, Driver Type etc.)

for complete add-in or connection and CMOS setup correctly.

Please also refer to all information of connector connection in this manual.

6. Please keep all necessary manual and driver disc in a good condition for future

re-installation if you change your Operating System.